|(Parent Dir)||folder|| ||Up to TI-83/84 Plus BASIC Misc. Programs (Utilities)|
|ark2.zip||3k||05-03-25||Archive / Unarchive / Lock / Unlock utility Version 2|
This is a small update to the existing version 2, it shows the current amount of free ram as you archive and unarchive programs.. nifty, and this program is still less than 900 bytes, so its small enough to not take up your whole calcs memory ENJOY!!!!1
|123util.zip||1k||03-12-07||Basic Utility 1.6|
**Updated** Finally got around to updating this file. I fixed the problem where it slows down a lot at the beggining, which was just bad programming on my part. I also added a few more functions that were not on v1.5. This utility will show you what process it's doing as it does it! Very good utility and anyone who programs or plays basic games should have this utility! Try it out!
If your RAM, ROM, or batteries are low when you run this, it will tell you. If not, then the program will simply return. Available as a group, or as an app. Custimizable alerts. Works great with Start-Up.
Press ENTER and the Program 1. Clears lists L1, L2, L3 and moves their contents to L4, L5, L6, just in case the data needs to be used later, 2. Clears TABLE, 3. Clears DRAW, 4. Removes conflicts between graphs and plots, 5. Resets some default settings that another program, or you, may have changed. Use ALLSET for the above, or anytime something seems wrong with the calculator.
|amem83pse.zip||1k||02-04-11||AMem TI-83 Plus Silver Edition|
AMem is a program that you enter the amount of memory free in bytes of your RAM and ARC and it converts it to a percentage and graphs it. More useful for ARC memory than anything, since it's hard to get an idea of how much ARC you actually have when you have so much.
|amem83p.zip||1k||02-04-11||AMem TI-83 Plus|
AMem is a program where you enter your free RAM and ARC in bytes and then it graphs it and puts it into a percentage. More useful for figuring your ARC memory since sometimes it hard to tell how much you really have since there is so much of it.
|asr.zip||7k||05-08-10||A Safe Run|
A Safe Run (ASR) was made to save a set of commenly used VARs (Y=,Lists,A-Z,Window) and some others, then it will run any program you whant. the program may be Basic, ASM, Archived, or UnArchived. when that program is done ASR will reload the VARs. if the program you ran did not return to ASR when it was done you can run ASR agan to reload the VARs. It is mostly used in math class so you may run a program without messing up your VARs!
|autilite.zip||1k||04-02-06||Utilite Calc System- v1.00|
The Utilite Calc System provids a ***user-friendly GUI & valuable system tools***, along with a description of all the programs it includes. This is not your basic "thrown-together" utility system, but the ultimate program for those of you that like to program and also just like keeping your calculator in good condition. -->When program is in use, press the corresponding # to the program you want to start. Press the symbol that is stated in parenthesis to see a description of that program. ***Please Email me with suggestions for additions to this program!!!***
aval2.0 nice and shiny and ready to delvar a through theta Mirage, homescreen, and Noshell friendly
Clears calc without clearing Ram, Apps, Groups, or anything else that is needed.
|backup.zip||1k||99-10-09||Cos Backup v1.0|
This is a backup utility program. Sometimes you accidently overwrite your strings that you wanted, so you use COS Backup and it backs it up into a data variable.
|calccleanup83p.zip||1k||03-03-07||Calculator Cleanup v1.0|
This program will clean up your claculator, i.e. delete all extraneous variables and modes, reset factory defaults, check the integrity of your RAM, and perform GarbageCollect. Super-useful!
This is probably the "bestest" and the most user friendly idiotproof free mem viewer writen in BASIC . Gauge , percentage and free mem shown in kb/Mb and for all TI from TI-83+ to TI-84+ SE . Please read "Read Me.txt" before usage -Uses 2 asm programs (inclued)
This program is an update of the older one and you now can delete lists and the older features are still there you can delete things like letter variables, matrices lists and strings one at a time or all at once. it can also set the window defaults as well as the mode defaults.
Two extremely useful programs that free up tons of RAM (up to 1000), sets modes, and carries out other menial calculator tasks. Great both for experienced programmer or the clueless person who did something and cant get the darn calc. Free your memory!
The well-known program CCleaner (from Piriform) for your pc is now available for the Ti-83/84plus calculator. The latest version of CCleaner (4.6) detect if variables are archived or not, so it doesn't crash when trying to clear an archived variable. It also have an image in DoorCS now and a smaller file size.
Checks both types of memory, contrast, batteries. Displays results as both numbers and bar graphs of percentage.
This program is designed to clean up your calculator after playing games. It also fixes some common errors and it is perfect for a high school/early college math curriculum because it puts most of the modes in the proper settings.
This program permits cleaning quickly your TI. It deletes only the programs you want and delete all non archived variables, hidden variables and apps installations. It has been done for programmers and users with a lot of programs. Ce programme permet de nettoyer rapidement sa calculatrice. Il ne supprime que les programmes que vous voulez supprimer et supprime toutes les variables non archivées, les variables cachées et les installations d'apps. Il est destiné à tous les programmeurs et à tous ceux qui ont beaucoup de programmes.
Cleaner is a small program (291 octets) that "cleans" your calc in order to have more free memory. Actually, the program clears : all reals (A -> Z + theta), all lists (L1 -> L6 + ClrAllLists), all matrix ([A] -> [J]) all strings (Str0 -> Str9) Cleaner est un petit programme (291 octets) qui "nettoie" votre calculette afin de libérer de la mémoire. En effet, le programme efface tous les réels (A -> Z + theta), toutes les listes (L1 -> L6 + ClrAllLists), toutes les matrices ([A] -> [J]) et toutes les chaînes (Str0 -> Str9) Vous récupérerez beaucoup de mémoire!!
Deletes real vars (A,B,C,...,Y,Z,theta), strings, L1 through L6, and clears entries.
|cleanperfect.zip||1k||03-10-23||Calculator AutoCLEAN & Auto Free RAM - 83+ Edition|
Entirely cleans out and frees up all variables on your calculator, including ALL HIDDEN VARIABLES and even your graph properties, not included in other cleanup programs. Over 150 actions taken. Leaves your programs intact and untouched. Satisfying On-screen Progress indicates what it is doing as it frees up your memory. Less than 1k on your calc. Merry cleaning! :)
This is a program I put together to help boost my calc's speed. It starts up, clears lists, clears entries, and performs a garbage collect. It's freeware so do what you want with it, but if you edit it, please send me a copy at firstname.lastname@example.org
This is acctualy my firt version. Cleanup is a program that allows you to pick what you want to clean up on your calc. You can choose what you want to delet also.
Stimpy's Cleaning Service (SCS) is an easy BASIC-program that restores the settings without resetting or deleting files.
Clears lists, variables, table, pictures, resets defualts, and garbage collects acording to users requests. By Justin Nichols
This program is basically an anti-virus, or something to cleanup after one has hit. It'll also work as a reset defaults type program. For either BASIC or MirageOS.
|clean.zip||1k||08-08-11||TI-Cleanup + Error Correction|
CLEAN is a simple progream which deletes all those annoying variables on your calculator that just sit there and waste space, now you don't have to delete them all yourself! CLEAN also corrects many common calculator errors such as diagnostics, garbage collect (defragment), g-t mode, scientific notation, float and much more.
This program clears/deletes variables, strings, and lists. Clears: all variables, all lists, all strings, a variable, a list, a string. Give it a try. It comes in handy when you are using multiple variables.
A simple, fast, lightweight way to clear the RAM memory and garbage collect all in two small programs.
This is a very useful program that deletes all unarchived variables ( good after playing a BASIC game)! Actually, no. this program will screw with ur memory. Try it, the ON key wont work when the calc is busy archiving all the variables it creates =D
Useful to completely clear the graph screen when needed, whether independently or as a subroutine. Clears the Y='s and any lines or drawings on the graph screen.
*OPTIMIZED! Contains an OS 2.53 version!* A very small (only 253 bytes on-calc) & fast cleanup program that doesn't interfere with almost any game saves. Note: If you use TI-OS v2.53, send the file OS_2-53.8xp to your calculator. Otherwise, send the file CLR.8xp. See the README.txt file included for details on what it does and doesn't do.
With this program, you can lock/unlock, archive/unarchive, or delete a program. More info on commands in the readme.
|convert4.zip||1k||01-06-15||Store Strings Forever!|
Do you hate it when Names,HighScore,Data stored on your string is erased? Deleted? Gone? well with this program you can store data from a string forever!*
It defrags your calculator just like after an application was deleted.
|delall.zip||1k||03-07-07||DelAll clears your RAm of Vars and Lists|
This little subroutin clears your RAM of all 27 vars and of the 6 lists. Use it buildt-in in our own prgms and to make Gemini and other huge games starteable. MirageOS-compatible.
This is an excellent program for all those annoying variables that does nothing but sit there and take up the little and precious RAM we have. This is a program to save time . This will not do anything that you cannot do by hand. However it would take you about 10 minutes to do. This program will cut it down to about 2 seconds. I hope you will enjoy this program. E-mail me for any bugs or things that I change in a later version. Positive comments on e-mails are greatly appreciated :P Note: This will not delete any programs or applications archived or unarchived.
this is an improvement to my old deleter this one has pictures amtrices lists and variables
Next time you scroll through the list of things on your calculator and see all these useless junks, run this program. It deletes variables, functions and much more from memory.
This is a coprehensive program that delets most variables. It will delet matrixs, strings, Y= Equations, other equations, A-Z and theta, and resets mode and format features and even some features found in the catoloug, such as diagnostics.
Just a prog to help manage your variables... if you need the memory and are a newb.
Deleats all Variables A-Z and the o with a line through it good to keep in ram if you play alot of basic programs
|developersarchivemanager.zip||1k||05-05-26||Developer's Archive Manager|
This is a small utility to manage groups of programs that need to be archived/unarchived simultaneously such as when writing subprograms for a project.
This program cleans up your calculator. It deletes all variables, resets mode options, and window settings. Very useful.
|end.zip||1k||09-10-24||Skipping an END|
This little program shows how many times you can skip its END-command, before it stops with an ERR: MEMORY. That number depends on how much free RAM you have, and how complicated the condition is that is related to the END-command. If you divide your free RAM with that number, you can see how much memory that is consumed for each time. It is important in programs that runs in a loop, or loops, not to skip END-commands, since you then risk to run out of memory. Skipping an END may consume more than a hundred bytes each time.
|excessmemsweeper.zip||1k||03-12-28||Excess Memory Sweeper|
Excess Memory Sweeper is a clean up utility that cleans up unnecessary variables left behind by most BASIC programs. If you haven't clean your calculator in a long time, this program will free up to 1000 bytes!
Safely free up space without deleting programs or applications. Hve the calculator do it for you, or choose custom mode. Much easier than goining through countless menu's.
|kp.zip||1k||01-12-22||Clean Up v1.2|
easy to use program, to clean up your calculator after using most assembly files and all other basic files.
This cool program I designed will delete your unused variables in order to allow your calculator to run with more memory and to be faster! Also this is the coolest program I have seen to delete variables.
Maintenance is a very small program that lets you Garbage Collect, clear entries, lists, variables, or everything at once!
This program deletes all your variables, Lists, and other unneeded files and does GarbageCollect (On the SE it also does RAM Clear).
|memcheck101.zip||1k||04-05-29||Memory Checkup 1.01|
This program can clear up your memory very quickly. You can choose to clear entries, lists, strings, the table, and all of the matrixes. You can also use it to take out the garbage. Using it can usually clear up a couple hundred bytes to an entire kilobyte, depending on how often you clear up your memory and if you use lists, tables, matrixes, etc. Only takes up 515 bytes. After you are done using it, archive it to get the 515 bytes of free ram. Try Memory Checkup today!
|memcheck.8xp||1k||02-11-12||MemCheck v1.1 for TI-83 Plus Silver Edition|
This prgram basically cheks your memory.
|memcheck.zip||1k||02-11-20||MemCheck v1.2 for the TI-83 Plus Silver Edition|
This program measure your memory percentage wise. All you have to do is check how much memory you have and then input it. THIS IS ONLY FOR THE TI-83 PLUS SILVER EDITION THAT DOES NOT HAVE A "K" THE END OF THE ARC MEMORY. IF YOU HAVE A TI-83 PLUS SILVER EDITION WITH A "K" AT THE END THEN YOU NEED MEMCHECK V1.1. Thank you for downloading, I hope you like it!!!
I have a TI-34 II Explorer Calculator that has 5 memories. There is a function for deleting these, so I thought why not design a number memory deletion program for the TI-83 Plus S.E. So I did It has 3 menu items, Yes, No, Version. Yes deletes all real number memories No exits. Version shows the version and exits. Simple!
Easy way to hack a value stored as a variable that most games use, such as money in Blackjack!
Memory Saver is a small program that saves your RAM.
Scans and cleans up RAM
A program that scans variables, lists, and matrices to help you hack the variables of almost all of your favorite games.
If you get an error message saying "Nonreal Ans" run this and you will not get the error message instead you will get the answer.
This program is used to portray your programs or applications menu as empty while in reality it isn't. Or used just to amaze friends.
|opensave.zip||1k||09-09-14||Open / Save|
this program is used to view, open, or save a graph data base or picture, very simple to use
|optera.zip||3k||12-03-29||Optera V 1.0 for Era-Systems V 2.11 (and higher)|
If you often get the message "ERR:MEMORY" then this app is something for you. This app makes your memory as free as possible. It deletes everything which you really dont need (e.g. background files of Era-Systems). If you want to play a game and you run this before the game won´t crash so fast.
|pbmtrash.zip||1k||00-05-15||PBM Trash v1.0|
This program basically just whipes your variables and empties lists with an easy to navigate interface.
deletes strings, variables, lists, resets your graph defaults and resets ram
This just cleans out the calculator to save some space. it deletes the basic variables, like L1-L6 and A-theta and resets the others, like graph windows. its pretty fast, excluding the Garbage collect. Now, it also resets the graph table, which i forgot to include in the previous version
This program uses the lists to take up a large chunk of RAM on your calculator. Nice for tricks on your friends. If you want to get your RAM back, just go to the 'delete lists' thing (I'm not sure how to explain it). I am not responsible for anything bad that happens from the use of this program. Leave questions, comments or suggestions if you want.
I was bored to manually delete those anoying variables, so I make this program. All his fonctions is described in the Read me file. I just hope it will be usefull as it is to me!
It gets rid of those annoying variables, a,b,c,d, and so on. It also gets rid of L1 through L6
This program takes care of the tedious parts of renaming programs. Simply type in the name of the original program, the new program name and this program will create a new file, copy over the code, delete the original program and then go through every other file on the calculator replacing any reference to the old file with a reference to the new file. Makes it much easier to rename files without worrying about changing every miniscule thing. Enabled by Celtic 3.
This program yill repair your calculator if you have problems with it.
This program resets tour calc with out earsing any prgms
The only basic program that I know of that can reset your ram without using any asm.
This calculator with reset all the variables on your calculator, plus a lot of other things. This is pretty much a full wipe on your calculator, restoring everything back to normal settings. So when you've screwed around with too many settings and you don't know how to fix them, use this program, it will put everything back up. But, unlike the full memory erase with the calculator, this won't delete any of your programs or apps. This only resets it back to default settings, without deleting anything vital to you. Picture variables are not reset either, however, string variables and the other variables are.
Changes settings back to the way you normally use them.
Using Start-up from TI you can use this program to clen your calculator, saving space every time you use it.
3 Programs that tells you the space occupied by a matrix, list, or string.
|ssweep2.zip||12k||02-05-12||System Sweep 2|
A memory manager for the TI-83 Plus calculator. I think I went overboard. This program will, and when I mean Sweep, I MEAN SWEEP. This program is like an uninstaller. It will literally DESTROY data. PICs, Strings, you name it. I can't explain it very well. Try and see for yourself.
|startbyjay.zip||43k||03-04-01||Start by Jay|
Start is used with the start up application. It helps manage your memory but mainly deleats worthless variables. It's very usefull.
|string.8xg||1k||03-06-05||String Viewer 83+|
This program is great if you want to look at strings and don't want the slow scrolling of your calculator. Scrolling is about 2-3 times faster that normal. Reads Str0. Press Clear to exit.
Instead of viewing strings on only one line of your calculator, only able to scroll it, you can use this program. It will display the string, if large enough, a page at a time no matter how long or how short. Sometimes the calculator will skip a few characters sometimes. I've come to the conclusion that the calculator sometimes will not determine the correct length of a string, throwing off the program slightly.
|supermem.zip||1k||08-11-30||Super Memory 3.1|
Supermemory is a nice little memory management prog written in BASIC so you don't have to deal with the slow-scrolling Memory Menu. Its 4 features include Scalar Clearing, Garbage Collect, Entry clearing, and RAM clear.
This program wipes all variables and sets your draw function more and does a whole lot of other stuff. Chip productions.
SysClean allows you to not only clean unnecessary files from your calculator, but edit your prefrences for the graphing mode and reset the factory defaults for the calculators graphing mode.
|systemcleanerpro.zip||1k||05-03-02||System Cleaner Professional|
This is a great system cleaner and one of the best and heres a few reasons why! System Cleaner Pro cleans your calc system but first you choose and edit what parts of the system you want to clean whether it being deleting pics or deleting variables it cleans your system. There are 10 options you can choose from to clean your system.
This is the first, andone of a kind program for the ti-83+. What this program does, is depending on the option youselect on the main menu, delets and ereases junk data(it embedds it self in you calc, you can't see it on the memory management menu), so that you have a faster and better working calculator. IT ALSO REDUCES YOUR CHANCE OF HAVING A CRASH. A must download.
This pack contains two programs. One deletes all misc. items that your calc. stores. Works with all TI versions. The second makes sure noone has messed with your pics. It tells you if any pics have been changed.
ttZDV, which is supposed to be the last program in your calculator display, will clear all lists and all letter variables, including "theta"; after hitting [PRGM], [UP], and [ENTER], you should find a convenient way to free up some space on your calculator without having to go through all that "[2nd] [Mem]" stuff. Hint: If you want, you can add more functions and more things to delete...
This program deletes all programs of which the names are found in Str1, separated by commas. Uses only Str0 and var R
A great utility for your TI-83 or TI-83+. It is great if you play a lot of basic games!
Does exactly what the title says! Easy way to set all the letter from A-Z plus the theta! I did not put my name on this because i trust all of you to not take credit for it.
Vardel 2 is a great upgrade from the previous version, it can handle all sorts of memory-cleanings. A very easy-to-use command reader is a new fast and effective way to start operations. But of course, all sorts of functions and operations are also sorted in menus and stuff. Enjoy!
Vardel is a fast program that deletes unneccesery files on your calculator. It resets settings, clears entries and starts the garbagecollect-operation also. Enjoy!
|varhelp.zip||1k||03-04-21||The One and Only Variable Helper Program|
I Made This Program For People That Dont Know How To Store Variables. You Can See Them, Make Them, And Even Clear Them!!!
This program lets you veiw all of the variables value and you can even delete them all the variables.
view all types of vars, lists, and strings
Nothing much, will delete all variables that BASIC Programs usually leave behind. This is an optional program for my larger startup program.
|virtualharddrives.zip||10k||04-05-05||VIRTUAL HARD DRIVES|
Three virtual hard drives on your calc. A must have for keeping your friens out of data in an organized and neat way!
|vrsearch83+.zip||1k||01-05-31||Variable Search Utility|
This is a utility most useful to either programmers or cheaters. It searches all of the letter variables for the number that you enter. 83 Plus version is MirageOs compatable.
|xreset.zip||2k||03-12-08||BASIC Memory Management|
A useful memory management program that deletes only the data that you instruct it to.
This program uses Celtic 3 and is pretty much a BASIC version of Xtravar Beta.
A subroutine called by some of Kiros Lionheart's programs necessary to run them.
ZipClean removes all stray variables from your calculator's RAM. Features include: -Deletes Y-Vars, A-Z variables, standard lists, strings, pics, GDBs, etc. -Fast and efficient code -Small program size -Asks for Garbage Collect