Re: TI-H: empeg player


[Prev][Next][Index][Thread]

Re: TI-H: empeg player




...and what is wrong with this? The only thing I can find wrong is the
price...

At 12:53 PM 4/1/99 -0600, you wrote:
>
>Thought some of you might get a kick out of this:
>
>http://www.empeg.com/main.html
>
>empegCAR Technical Specifications
>
>Hardware
>
>Processor  220MHz StrongARM S-1100-DA
>Flash memory  1MB
>RAM  8MB 60ns FPM
>DSP  SAA7705H
>DACs  16 bit sign-magnitude, fourfold oversampling digital filters, noise
>shaping
>Tuner  FM fuzzy logic autotuning radio, full RDS, RBDS capability
>FM tuning range  88 to 108 MHz, 12.5 kHz steps
>Display  128 x 32 dot matrix vacuum fluorescent display, 2 bits per pixel
>IR capability  SIR IrDA I/O, Consumer IR input
>Buttons  4 software assignable pushbuttons, in diamond layout on front panel
>HDD ports  2 ATA 2.5" HDD standard 2MM headers on main board HDD bays accept
>17mm, 12.7mm or 8mm standard laptop drives with corner mounting
>screws.Serial IO Full 9-pin PC serial port on head unit, data rate to
>230Kbits/s. TX, RX, GND, +12V @ 100mA on 300mm flying lead from docking
>connector, terminated in 9 pin female socket
>USB  12MBit/s standard type B socket on head unit
>RF input  Standard antenna socket with adaptor for euro socket
>Power input  +12V on 300mm flying lead fused at 2A with inline fuseholder.
>Negative earth only
>Auxillary control output  +12V @ 1A maximum on 300mm flying lead
>Audio outputs  1V line level stereo RCA jacks. 4V line level front & rear
>stereo
>  RCA line jacks on docking connector
>Audio inputs  1V line level stereo RCA line jacks
>
>Audio
>
>DAC sample rate  fixed 44.1KHz
>DAC typical S/N ratio  110dBA
>
>
>
-Dan


Follow-Ups: References: