Re: TI-H: E2 Read/Write

Re: TI-H: E2 Read/Write

• To: ti-hardware@lists.ticalc.org
• Subject: Re: TI-H: E2 Read/Write
• From: tsaimelv@pilot.msu.edu (Mel Tsai)
• Date: Fri, 07 Aug 1998 01:18:06 GMT
• Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
• In-Reply-To: <l0313032db1ef8f393278@[192.168.1.66]>
• References: <l03130319b1ef28f72b6d@[192.168.1.66]> <l03130319b1ef28f72b6d@[192.168.1.66]> <l0313032db1ef8f393278@[192.168.1.66]>
• Reply-To: ti-hardware@lists.ticalc.org

>>>The docs say 1,000,000 writes, Bryan says 1,000.
>>
>>Uhh, the docs DO NOT SAY 1,000,000 writes, grant.  Haven't we had this
>>conversation before?  Bryan says 100,000 which is probably correct
>>since that's Atmel's current capability in their parallel flash.
>>
>>The current state-of-the-art in high density flash is 300,000 writes.
>>No one is even close to 1 million yet.
>
>The preliminary docs from october said taht I think...  Atmels current docs
>aren't correct anyway...so...

They didn't say 1000000 writes per block... they said 1,000,000
*total* page writes minimum.  There is no way each block can be
rewritten 1000000 times.  Serial EEPROM is barely crossing that
ability, much less flash.

-Mel

• Re: TI-H: E2 Read/Write
• From: Grant Stockly <gussie@alaska.net>

• Re: TI-H: E2 Read/Write
• From: Grant Stockly <gussie@alaska.net>
• Re: TI-H: E2 Read/Write
• From: Grant Stockly <gussie@alaska.net>

• Prev: Re: TI-H: PCB
• Next: Re: TI-H: PCB
• Index(es):
  • Main
  • Thread