A82: Re: Re: A83: thanx.more int info
[Prev][Next][Index][Thread]
A82: Re: Re: A83: thanx.more int info
Making Ash work on the TI83 would be no problem at all, and it would not
take very long time, but i do not think that it would be very useful since
asm is supported on the TI83. When i ru the rom dump program to get a dump
of the TI83 rom i end up not getting a complete dump, and some of the
pages are messed up. I have checked the source for the program, and that
is not the problem. I had a look at the table which inplements the support
for all the rom calls on the ti83, and found out how it changes the rom
page. The dump program uses the same method as the rom calls does, but
some of the rom can not be read by the program eventhough it can be
executed from the same program. To get more information on the TI83, and
to use the info avaible for the TI83 on the TI82 we need a complete rom
dump. Finding out about the ports is easy, and i could find the
information with the dump that i have, but like many other things i just
dont have the time to do it.
Dines
-----Original Message-----
From: GeradS711@aol.com <GeradS711@aol.com>
To: assembly-82@lists.ticalc.org <assembly-82@lists.ticalc.org>
Date: 15. november 1997 02:40
Subject: A82: Re: A83: thanx..more int info
>Dines,
>You were talking about how it was impossible to get a decent ROM (RAM??)
Dump
>off an 83. Since the way ASH executes is supported on all of the calcs,
how
>hard would it be to make ASH for the 83 and get a rom dump so we could
find
>out more about it?? Like where and what the ports are?
>Gerad
>
_______________________________________
Dines Justesen
Email: dines@post1.com or
c958362@student.dtu.dk
WWW : http://www.gbar.dtu.dk/~c958362/
_______________________________________