Re: TI-H: Installing El Panels
[Prev][Next][Index][Thread]
Re: TI-H: Installing El Panels
On mine, I unfolded the ribbon cables so I could get a little wiggling
room. Then I held a razor knife (refill type used for utilty knives) with
some pliers and gently pushed it in. Sometimes the pressure from inserting
the knife will cause the LCD to discolor, so be careful about that.
I just moved the knife around the LCD until I had it loose. Then I peeled
what remained of the foam from the back of the LCD and from the circuit
board. Then, using the same knife blade, I picked the corner of the mirror
from the LCD and peeled it off. Nice and clear, but with a tint of green.
On Wed, 4 Mar 1998, Andrew Boudreau wrote:
> Well after scoping it out pretty well the 85 has two seperate rectangular
> pieces of BLUE foam they seem like maybe you could slide a think hobby
> knife across the top to "fillet" the foam away from the lcd, I tried using
> a TINY regular screw driver to scrap at some but, it didn't seem to come
> off very easy. Though you can get at this stuff from one side and the
> bottom. I wonder if you take that tape off the top what will happen.
> If anyone has anything to add please feel free. I would like to know if
> this stuff will work!
--
Greg Hill
greg-hill@bigfoot.com
www.comports.com/link
Follow-Ups:
References: