Re: TI-H: expansion
[Prev][Next][Index][Thread]
Re: TI-H: expansion
actually, this does seem to be what i want. i'll fool around with it and
let you all know. thanks a bunch. people can always count on these lists
for help. that is sort of a good thing about them.
At 03:28 PM 4/16/98 , you wrote:
--- ---
--- ---Most of those are address (if youre talking about ISA) slots.
There are 8
--- ---I/O lines, something like 20 address lines, and special ones,
like the
--- ---STROBE and such. The parallel port plugs into the 8 I/O lines,
the STROBE,
--- ---a couple more. Ok, here is the list of pins corresponding to
the port:
--- ---
--- ---1 - STROBE
--- ---2 - DATA BIT 0
--- ---3 - DATA BIT 1
--- ---4 - DATA BIT 2
--- ---5 - DATA BIT 3
--- ---6 - DATA BIT 4
--- ---7 - DATA BIT 5
--- ---8 - DATA BIT 6
--- ---9 - DATA BIT 7
--- ---10 - ACKNOWLEDGE
--- ---11 - BUSY
--- ---12 - PE (OUT OF PAPER)
--- ---13 - PRINTER ON LINE
--- ---14 - AUTO LINEFEED AFTER CARRIAGE RETURN
--- ---15 - PRINTER ERROR
--- ---16 - INITIALIZE PRINTER
--- ---17 - SELECT/DESELECT PRINTER
--- ---18-25 UNUSED OR GROUND
--- ---
--- ---Ok, this came directly from "Robot Builder's Bonanza: 99
inexpensive
--- ---robotics projects". Don't get me wrong, someone else was
talking about it.
--- ---It's a great book, this is where the speech synthesizer came
from (if I can
--- ---ever find the chip). The address is 888-D or 3BC-H. Hope this
comes in
--- ---handy.
--- ---
--- --->alright, i'm looking for someone who knows about computer
hardware. i'm
--- --->looking for the schematic for a printer board. one you can
buy for about
--- --->$20 and plug it into an expansion slot in order to get an
extra LPT port.
--- --->ok, so if anyone has one could you please mail it to me or
post it on this
--- --->list. probably mailing it to me would be better. i know how
some of you
--- --->are mad about taking up bandwidth and stuff! =)
--- --->
--- --->if no one has a schematic . . .
--- --->
--- --->the part you plug the board into the expansion slot has 31 (i
think) slots.
--- ---> well, on the printer board, there is 29 or so back and front.
really what
--- --->i need the schematic for is so i can tell which of those 29
things
--- --->corresponds with the 25 pins of the board. the part that you
plug your
--- --->printer into. do you understand this?
--- --->
--- --->well, hope you can help.
--- --->
--- --->KiMo
--- --->________________________________________________
--- --->
--- --->--->ICQ #: 7176765
--- --->--->mailto:kimo@iland.net
--- --->--->http://www.iland.net/~kimo/index.html (TI-85/86 Webpage)
--- --->
--- --->Send a short email to my screen right when I log online using:
--- --->--->mailto:7176765@pager.mirabilis.com
--- --->(Do you understand what this is for? Tell me!)
--- --->
--- --->ADVICE: Don't use Microsoft's Internet Explorer!!!
--- --->
--- ---
KiMo
________________________________________________
--->ICQ #: 7176765
--->mailto:kimo@iland.net
--->http://www.iland.net/~kimo/index.html (TI-85/86 Webpage)
Send a short email to my screen right when I log online using:
--->mailto:7176765@pager.mirabilis.com
(Do you understand what this is for? Tell me!)
ADVICE: Don't use Microsoft's Internet Explorer!!!
References: