Re: TI-H: TI-MemSwitch
[Prev][Next][Index][Thread]
Re: TI-H: TI-MemSwitch
I didnt say directly did I? the traces conect some of the leads directly
together, and some connect the new chip to the pins where the ROM modual
goes... exactly the same as the guy did with his 92.
so why are you saying it wont work... someone has done it already and it
works fine.... you dont know what you are talking about.
>
>You'll run out of address space soon anyway... If the traces directly
>connected the pads, then TI has some bad engineers...
>
>>I just opened my 1.4 version... the board has a different ram chip its
a
>>SONY cxk581000aym-70ll
>>******BUT******
>>here is the interesting point!!!!!!!!!!!!
>>the chip is labled U10R on the board,
>>DIRECTLY ABOVE THE RAM CHIP there is an outline and traces for A
SECOND
>>CHIP!!!! already on the board... the traces would conect the two
>>chips(if a second one where soldered in) almost EXACTLY like the
>>scematics for what that guy did on his page....
>>Hmmmmm looks like TI was contemplateing adding more RAM to futer 92's
>>but never did it.....
>>hehehe VERY interesting :0
>>
>>
>>
>>
>>>> it IS possible to add more RAM but none has done it yet,
>>>
>>>i think someone did it for a TI-92...
>>>here's the link: <A HREF="http://www.daewoo.fr/~jjm/ti92.html">TI92
>>MEMORY
>>>UPGRADE</A>
>>>
>>
>>
>>______________________________________________________
>>Get Your Private, Free Email at http://www.hotmail.com
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com