Re: TI-H: Parallel Link Problem.


[Prev][Next][Index][Thread]

Re: TI-H: Parallel Link Problem.




>Not really.  My expander was not on, so nothing was active.  My problem is
>that pin 12 has no power to it.  Do you know why that could be?

It could be that the parallel port is set to the wrong type in the
computer's BIOS (SPP, EPP, ECP, or ECP+EPP).  I couldn't get my old dot
matrix printer to work when it was set to ECP or ECP+EPP.  It worked fine
under the other settings.

>----------
>> From: David Knaack <dknaack@hotmail.com>
>> To: ti-hardware@lists.ticalc.org
>> Subject: Re: TI-H: Parallel Link Problem.
>> Date: Thursday, August 06, 1998 8:26 AM
>> 
>> 
>> >From: "David Whittaker" <tubadave@sonet.net>
>> >I have my Parallel link included with my expander.
>> 
>> I think the link tester is supposed to run with nothing attached
>> to it (just the link hardware, no calc or expander).
>> 
>> Is this how you were running it?
>> 
>> ----------------------------------
>> David Knaack <dknaack@hotmail.com>
>> Electroluminescent Backlighting:
>> http://www.GeoCities.com/SiliconValley/Lab/5725/
>> 
>> 
>> ______________________________________________________
>> Get Your Private, Free Email at http://www.hotmail.com
>
>