Re: TI-H: Basic $5 link question
[Prev][Next][Index][Thread]
Re: TI-H: Basic $5 link question
xenocide@erols.com wrote:
>
> Well, after getting discouraged by that cable, i decided to rebuild one
> from scratch. the new cable also passes the link test, getting the
> desired pinout results, but it is still not functioning properly. i
> tried to do a calc-to-calc link with my calculator, which worked fine,
> disproving the theory that the port on my ti-83 is bad. IT is making a
> connection in some sence of the word, as the programs i am using do
> report errors such as "header too large" and such. i did use a ti calc
> link cable for the 2.5mm jack, so i don't think that could be the
> broblem either. anyone have an idea as to what might be the problem? any
> help would be apricated. if you can't help me with the parallel cable,
> could someone please post a copy of the plans for the serial link? if i
> can't get my cable working, i could always try building that one.
>
> Thanks
> ~X
You using any printer spooling software? If so, try disabling it.
--
Jonathan Anderson
sarlok@geocities.com
"I can't be wrong - my modem is error correcting."
Follow-Ups:
References: