Re: Homemade paralel cable.

To: CALC-TI@LISTS.PPP.TI.COM
Subject: Re: Homemade paralel cable.
From: Kirk Lane <snake64@GEOCITIES.COM>
Date: Fri, 26 Feb 1999 20:40:47 -0700
Organization: Internet Access Inc. NetA.Com
References: <Pine.GSO.4.02A.9902251655010.21062-100000@camoes.rnl.ist.utl.pt> <36D6AF5F.661672F1@iai.fzk.de>
Reply-To: Kirk Lane <snake64@GEOCITIES.COM>
Xref: paladin.american.edu bit.listserv.calc-ti:28189

Yeah, I made it too...make sure you are reading the pins from the right side
of the connector (I started doing it wrong :P )

--
Kirk Lane
snake64@geocities.com
ICQ: 28171652

Jvrg Wehlend wrote in message <36D6AF5F.661672F1@iai.fzk.de>...
>>  Just wondering if any of you had tried making the parallel cable that is
>> on the ticalc.org's homepage.
>>  Well...it looks real simple, but in fact it isnt...:(
>>  I tried making both the serial link cable (without success) and the
>> parallel cable (also without success....).
>>  Did any1 make the cable? if so..did it work...??
>
>I built such a cable. It is the one that consists of the 2.5mm plug, the
>25pin connector, 2 diodes and 3 wires. I have made it 1.5m long. It works
>very well.
>You can't use it with the GraphLink Software. I downloaded a program named
>Winlink92. I think it was anywhere at ticalc.org
>
>Joerg Wehlend
>
>

References:

Homemade paralel cable.

From: Joao Manuel Henriques <jmh@CAMOES.RNL.IST.UTL.PT>

Re: Homemade paralel cable.

From: =?iso-8859-1?Q?J=F6rg?= Wehlend <wehlend@IAI.FZK.DE>