TI-83 WORKING LINK!!!!!!
[Prev][Next][Index][Thread]
TI-83 WORKING LINK!!!!!!
ok,first off, you guys are LIARS!
my complete link cost me $4.17 NOT $4.00
now, here is my Radio Shack price list
Catalog No. Price Description
276-1429 1.99 Parallel Male connector, crimp style 25 pin
276-565 .99 Package of 2 5.1-volt zener diodes
276-1549 1.19 One hood cover for parallel connector
total: $4.17 without tax
notes:
with crimping connector, i found soldering UNNEEDED!
what you do:
label one diode as (1) and the other as (2)
1) cut your TI-TI link cable at one end, strip the wires, there
should be a white, red, and uncovered copper wire
2) connect white red wire to anode side of diode (1), then connect
the pair to terminal 13 of parallel connector
3) connect cathode side of diode (1) to terminal 3
4) connect white wire to anode side of diode (2) and connect pair to
terminal 12
5) connect cathode side of diode (2) to terminal 2
6) connect bare copper wire to terminal 22
plug it in and transfer with a program using printer ports. i use CAL.exe,
from ticalc.org's page.
and remember last but not least
IT WORKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Follow-Ups: