Re: A89: official 89 asm info.


[Prev][Next][Index][Thread]

Re: A89: official 89 asm info.




HAHAHA, YOU PISSED ME OFF SO I'M GOING TO POST GARBAGE!
Now hopefully you'll stop with the complaints and let me read important stuff
like jokes.

In a message dated 11/4/98 10:23:18 PM Mountain Standard Time, 
yomaster@inconnect.com writes:

> IT'S MESSAGES LIKE THIS THAT PISS ME OFF BECAUSE THEY ARE JUST A WASTE OF
>  EVERYONE'S TIME.  This is an official list.  Let's not post GARBAGE like
>  this EVER AGAIN.  PLEEEEAAAASE.  We are all very busy people, I'm sure, and
>  it's just such a pain trying to read IMPORTANT messages while having to
sort
>  through lame messages that point out ABSOLUTELY NOTHING in such an annoying
>  and ANAL fashion.
>  I mean, I'm frustrated as it is because I have to be a freaking baby-sitter
>  and write stupid messages like this one; trying to emphasize that we are
not
>  little children and we all just need to THINK a little bit before we go and
>  hit that "reply to all" button.  come on folks.  just GROW UP.
>  
>  BTW, this goes for EVERYONE on this list, including me.  I appologize for
>  wasting everyone's time with this message.  now let's GET SOME REAL WORK
>  DONE HERE.  If you want to blabber on about spelling and language and other
>  non-important issues, PLEASE just get an IRC client and go talk with Guido
>  the admin of #littlechildren, but at least spare us all from having to
>  listen to this hideous waste of 2kb hard drive space.
>  
>  * one more thing I'd like to add.  let's all conserve some downloading time
>  and CUT some of the crap out of the >>> replied messages.  I didn't cut
this
>  one away because I'd all like you to NOTE how many times this SAME MESSAGE
>  has been repeatedly downloaded OVER AND OVER.  We've read it.  if you have
a
>  reply, just leave in what your REPLYING TOO, not the whole essay.
>  
>  >
>  >Wow.  This guy has really got to learn to spell...
>  >
>  >
>  >
>  >
>  >---Jerzy Tanski <jtanski@provide.net> wrote:
>  >>
>  >>
>  >> !!!!!!!!!!!!!!!!!!!!!
>  >> I got this email from ti. don't get pissed or write them.
>  >> !!!!!!!!!!!!!!!!!!!!!!!!!!
>  >>
>  >>
>  >>
>  >> Thank you for your continued e-mail.
>  >> The *un*official word is that it should be ready within the next two
>  >> weeks.
>  >> I suggest that you check periodically at www.ti.com/calc/docs/89.htm
>  >for
>  >> more information and updates.
>  >>
>  >> I hope you find this information helpful. If you have any further
>  >> questions
>  >> or comments please feel free to contact me at your convenience.
>  >>
>  >> Sincerely,
>  >>
>  >> Samson Craft
>  >>
>  >> Visit the TI World Wide Web home page:
>  >>
>  >> www.ti.com/calc
>  >>
>  >> --------------------------------------------------------------------
>  >> Educational & Productivity Solutions
>  >>
>  >> Customer Support Center             Email:  ti-cares@ti.com
>  >> Texas Instruments                        or
>  >> PO Box 650311 M/S 3962              scraft@ti.com
>  >> Dallas, TX 75265                 Phone: 1-800-842-2737 General
>  >> Information
>  >>                                         1-972-917-8324 Technical
>  >> Information
>  >> --------------------------------------------------------------------
>  >>
>  >>
>  >> ========================= ORIGINAL MESSAGE ==========================
>  >>
>  >> [ jtanski@provide.net on 10/23/98 8:09:02 PM ]
>  >>
>  >> I'm wery disapointed in you because, i realy didn't buy the calculator
>  >> to
>  >> play games or do math. It was because i was going to write programs
>  >for
>  >> it
>  >> in my spare time. It seamed like a quite good platform, it's not as
>  >big
>  >> as
>  >> 92, you can carry it to school, it has more memory, assemebly
>  >> programation
>  >> (key point here). Well i would be interested about (+- 2 months) it
>  >will
>  >> be
>  >> aout. Second of all is there a a good cross assembler i could use
>  >and a
>  >> linker, any one. I could posibly figure out some stuff with having the
>  >> write
>  >> software. Any info would help like the rom calls, i'm not interasted
>  >in
>  >> using one of the asm shell out there, because all of the are still in
>  >> beta
>  >> faze and the calc is soposed to run the maching code. I'm also
>  >> interasted
>  >> if
>  >> there is going to be some info on TSR programs. I might pose these
>  >> emails
>  >> on
>  >> TIcalc.org because a lot of people are mad jus tlike me.
>  >> > -----Original Message-----
>  >> > From: banderson@ti.com [mailto:banderson@ti.com]
>  >> > Sent: Thursday, October 22, 1998 2:45 PM
>  >> > To: jtanski@provide.net
>  >> > Subject: RE: TI-89 ASM
>  >> >
>  >> >
>  >> >
>  >> > Thank you for your message.  Unfortunately, I don't have any
>  >> > TI-89 assembly
>  >> > programming information because it has not been completed yet.  As
>  >soon
>  >> as
>  >> > this information is complete, we will place it on our web site at
>  >> >
>  >> > http://www.ti.com/calc/docs/89.htm
>  >> >
>  >> > I regret that I cannot offer you any more information than that,
>  >but I
>  >> > simply do not have an announced time for the assembly
>  >documentation to be
>  >> > released.
>  >> >
>  >> > If you have any further questions or comments please feel free to
>  >contact
>  >> > us at your convenience.  For faster service on replies, copy this
>  >message
>  >> > in the response, and send the response directly to
>  >ti-cares@ti.com. Also,
>  >> > please address your response to me (i.e. place my name at the top
>  >of your
>  >> > reply or at the end of the subject line).
>  >> >
>  >> > Best Regards,
>  >> >
>  >> > Brigette Anderson
>  >> >
>  >> >
>  >------------------------------------------------------------------------
>  >> > Educational & Productivity Solutions
>  >> > Texas Instruments                      Email:  ti-cares@ti.com
>  >> > PO Box 650311 M/S 3962                 Phone: 1-800-TI-CARES or
>  >> > Dallas, TX  75265                      (972)917-8324 (technical
>  >help)
>  >> > Internet: http://www.ti.com/calc/      FAX:    (972) 917-0747
>  >> > http://www.ti.com/organizers/
>  >> >
>  >------------------------------------------------------------------------
>  >> >
>  >> >
>  >> > ========================= ORIGINAL MESSAGE
>  >==========================
>  >> >
>  >> > [ jtanski@provide.net on 10/22/98 6:14:09 PM ]
>  >> >
>  >> > > -----Original Message-----
>  >> > > From: banderson@ti.com [mailto:banderson@ti.com]
>  >> > > Sent: Wednesday, October 21, 1998 2:24 PM
>  >> > > To: jtanski@provide.net
>  >> > > Subject: Re: TI-89 ASM
>  >> > >
>  >> > >
>  >> > >
>  >> > > Thank you for your recent E-mail. We appreciate your support of
>  >our
>  >> > > products. We feel that getting the calculator hardware to the
>  >market as
>  >> > > quickly as possible is our first priority and so we dedicate our
>  >> > resources
>  >> > > to that task rather than to some of the peripheral tasks such
>  >> > as assembly
>  >> > > information.  Now that the TI-89 and TI-92 Plus have been
>  >released, our
>  >> > > engineers have turned their efforts toward completing this
>  >> > documentation.
>  >> > >
>  >> > > I sincerely regret any inconvenience that not having this
>  >> > information may
>  >> > > cause you.  We realize that the assembly programming abilities are
>  >> > > important to our customers and we are striving to prepare this
>  >> > information
>  >> > > as quickly as possible.
>  >> > >
>  >> > > If you have any further questions or comments please feel free
>  >> > to contact
>  >> > > us at your convenience.  For faster service on replies, copy
>  >> > this message
>  >> > > in the response, and send the response directly to
>  >> > ti-cares@ti.com. Also,
>  >> > > please address your response to me (i.e. place my name at the
>  >> > top of your
>  >> > > reply or at the end of the subject line).
>  >> > >
>  >> > > Best Regards,
>  >> > >
>  >> > > Brigette Anderson
>  >> > >
>  >> > >
>  >>
>  >------------------------------------------------------------------------
>  >> > > Educational & Productivity Solutions
>  >> > > Texas Instruments                      Email:  ti-cares@ti.com
>  >> > > PO Box 650311 M/S 3962                 Phone: 1-800-TI-CARES or
>  >> > > Dallas, TX  75265                      (972)917-8324 (technical
>  >help)
>  >> > > Internet: http://www.ti.com/calc/      FAX:    (972) 917-0747
>  >> > > http://www.ti.com/organizers/
>  >> > >
>  >>
>  >------------------------------------------------------------------------
>  >> > >
>  >> > >
>  >> > > ========================= ORIGINAL MESSAGE
>  >==========================
>  >> > >
>  >> > > [ jtanski@provide.net on 10/17/98 3:16:53 PM ]
>  >> > >
>  >> > > I wan't to write programs in asmembly for my TI-89 calculator
>  >but there
>  >> > > is no guide or help for doing so. Plses help
>  >> > >
>  >> > >
>  >> > >
>  >> > >
>  >> > I greatly need asm, calls and help. Plese don't send me the 89 asm
>  >wizard
>  >> > mesage. I bouth the calculator mainly because asm is built in and
>  >it's
>  >> > powrfull procesor, which is very good for asm, programing.
>  >> >
>  >> >
>  >> >
>  >> >
>  >> >
>  >>
>  >
>  >==
>  >+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
>  >|                      Jeremy  Moore                       |
>  >|                   senoramor@yahoo.com                    |
>  >|                     ICQ:  #18766049                      |
>  >|                 http://fly.to/favelinks                  |
>  >+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
>  >"Did somebody say McDonald's?"  --Every freakin' commercial.
>  >_________________________________________________________
>  >DO YOU YAHOO!?
>  >Get your free @yahoo.com address at http://mail.yahoo.com
>  >