Re: A86: Re: 86 link
[Prev][Next][Index][Thread]
Re: A86: Re: 86 link
i think it might have something to do with the type of parallel port you
have, the link won't work with my desktop(p150) but it will with my
laptop (p133) and the only difference, besides the slight difference in
speed, is that on the desktop i can change some settings in the bios for
my parellel port, so i think that the desktop port is whats causing the
problem.
cyamran wrote:
>
> MrManson wrote:
>
> > Keith Batten wrote:
> > >
> > > MrManson wrote:
> > > >
> > > > caymran wrote:
> > > > >
> > > > > Press 2nd link recieve before sending from the computer to the calc.
> > > >
> > > > nope already tried it, still it gives me error 38 link transmission :( i
> > > > heard that it wont work it your puter is too fast, i got a p166. would
> > > > this be the problem?
> > > there is a good link program at ticalc.org called wtran8 that seems to
> > > work well. it is for all the calculators except the 92 and it is for
> >
> > tried it, didnt work, think its because of the speed of my puter
>
> I use cal and the parallel link on a pentium pro 200. No problems.
>
> check the link, make sure you have the program set to the right port, make sure
> the link cable is fully plugged into the calc.
>
> You have probably heard this a million times, if so disregard it completely.
>
> Good luck,
> Caymran
References: