[A83] Re: A83: Using Interups, and strings
[Prev][Next][Index][Thread]
[A83] Re: A83: Using Interups, and strings
Well, what about the rom calls that exchange the registers? _GrBufCpy
probably does. Theres gotta be some more, too. The problem with this is
when your interrupt starts it exchanges the registers to *save* them and if
you call a routine that exchanges them again and changes them, when you
exit the interrupt the registers will be changed. And you don't really
know which ones exchange the registers and which ones don't. I suppose the
only way to figure out which ones work would be to test them all in an
interrupt.
----------------------------------------------
Original Message
From: "Robby Proie"<playnogamz@nls.net>
Subject: RE: A83: Using Interups, and strings
Date: Sat, 17 Feb 2001 19:54:56 -0500
>
>Although I am not certain, all of my tests have lead me to the conclution
>that B_CALLs do not cause problems with interupts what so ever. I don;t
>know the spacifics of any page changes, but all of my tests seemed to work
>perfectly, nomatter what B_CALLs I used.
>
>-----Original Message-----
>From: owner-assembly-83@lists.ticalc.org
>[mailto:owner-assembly-83@lists.ticalc.org]On Behalf Of Nicolas Gilles
>Sent: Friday, February 16, 2001 5:56 AM
>To: assembly-83@lists.ticalc.org
>Subject: Re: A83: Using Interups, and strings
>
>
>
>Yes, the problem comes from relocation of the code...
>in your code text1, is just a name for the address Pointer of the string
(eg
>$9dAA) so when you copy your code for interrupt to another location,
>probably $9a9a (i'll use this in the example) so text1 = $9daa but the what
>it should be to really point the string, it should be relative to $9a9a...
>
>IntStart:
>ld hl,text1-intstart+$9a9a ; Make it relative to 9a9a (text1-intstart makes
>it relative to intstart, and then add the 9a9a offset...)
>bcall(_puts)
>text1: .db "Sample String",0
>
>
>Then another note:
>using B_CALLing in an interrupt isn't bad, it doesn't leave the rom page
>switched, this can be proven just by saying that if it didn't restore the
>original rom page, even APPs would not be working...
>Someone please confirm this.... I hope you understand what I mean...
>
>>From: "Robby Proie" <playnogamz@nls.net>
>>
>>
>>Hi:
>>
>> Here is a puzzle that I have not yet been able to figure out. Ok, to
>>start
>>out with, I am creating my own interup, with most of the core code comming
>>from the the interrupt guide at www.ticalc.org/pub/text/ . I want it to
>>display a string, but when I set it up as a regular program that would
>>display a string...
>>
>>
>>(More Code)
>>
>>
>>ld hl,text1
>>
>>bcall(_puts)
>>
>>text1: .db "Sample String",0
>>
>>
>>(More code)
>>
>>It only displays a bunch a garbled information when you press the right
>>key.
>>How do I copy the string so it will be displayed correctly when the user
>>presses the right key.
>>
>>Thanks in advnce
>>Rob
>>
>>
>>P.S. My interupt routine itself works just fine, I have tested it with
>>other
>>operations, like clearing the screen, and it performs without a problem.
>>
>>
>
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>
>
>
_____________________________________________
Free email with personality! Over 200 domains!
http://www.MyOwnEmail.com