The first program that helps any kind of engineer in studying beams and Saint-Venant problems. 
The programs calculates support pressures and stress graphics of many isostatic support solutions 
and any kind and combination of loads.  There is moreover the opportunity to chose ideal or real 
beams and, for the last one,  to chose material and section with their characteristics. A very easy 
interface will help you everywhere and will give you the chance to choice your solution and also to 
compare graphics with double display option and to save them.

The first menu let you chose first length, area and density of you beam (density and area are equal 
to 0 per default) and calculates the distributed load because of the beams weight; you can also ask 
for an help and chose material and section from a big range of choices.  So you can chose your 
specific support configuration and the loads and/or the bending moments from a browser and run 
the program.
The program calculates support pressures and the stress graphics and display the second menu 
where you can see the draw of the correct pressure directions, stress graphics and an eventual 
comparison of two graphics.
There is finally the possibility to save your data before to quit and make them ready for another 
application.

This program has been used quite a lot of times without bugs. If someone finds a bug is asked to let 
me know as soon as possible and I will try to correct it immediately.
Thank you very much for your help

Paolo Silingardi
