To find this:
|
Do this:
|
|
|
|
Steps for Series:
- Choose Series from the main menu.
- Enter in the number of resistors. (This case: 2)
- Enter in the resistor size for all the resistors. (This case: 3 and 2)
- Enter in the battery volt size. (This case: 9)
- Wait for the Anayzing and Calculating to finish.
- The Equivalent Resistance is displayed. (This case: 5)
- Press Enter to continue. (2x)
- Look through the last pages for the Amps and Volts for each resistor.
Note: The Amps and Volts for each resistor have a different page.
|
To find this:
|
Do this:
|
|
|
|
Steps for Parallel:
- Choose Parallel from the main menu.
- Enter in the number of branches. (This case: 2)
- Enter in the resistor size for all the branches. (This case: 3 and 2)
- Enter in the battery volt size. (This case: 9)
- Wait for the Anayzing and Calculating to finish.
- The Equivalent Resistance is displayed. (This case: 6/5)
- Press Enter to continue. (2x)
- Look through the last pages for the Amps and Volts for each resistor.
Note: The Amps and Volts for each resistor have a different page.
|
To find this:
|
Do this:
|
|
|
|
Steps for Complex:
- Choose Complex from the main menu.
- Enter in the circuit. Any combination is allowed.
- When you add a split or branches, you have to end the section(option 3)
when you start entering in another section or the original branches or parallel circuit.
- There must be a resistor on each branch.
- You can only end the circuit entry point when the 'Done' appears as option 3.
- Enter in the battery volt size. (This case: 9)
- Wait for the Anayzing and Calculating to finish.
- The Equivalent Resistance is displayed. (This case: 5)
- Press Enter to continue. (2x)
- Look through the last pages for the Amps and Volts for each resistor.
Note: The Amps and Volts for each resistor have a different page.
|