Shock Evaluator 1.00a

by Ghino di Tacco 
info at ghinoditacco@hotmail.com
PabloSoft Research, inc.

This application has been developed for the TI92+ calculator.
For a DeLaval nozzle (Q1D model), it calculates:
	1. exit density;
	2. exit pressure;
	3. exit temperature;
	4. exit Mach number;
	5. exit speed;
	6. pressure at the exit section when no shock takes place in the nozzle (pusu);
	7. isentropic exit pressures (plim,pad);
	8. stagnation pressure after the shock (p02);
	9. Mach no. before the shock (M2);
	10. shock area (As/Amin).
The input data are:
	1. stagnation pressure of the reservoir:
	2. either: 	a. exit pressure or
			b. exit temperature or
			c. exit density.

Simply type Shockev(). Let it run (it takes less than 2 minutes): it might tell you 
that the input data are not compatible with a shock in the nozzle.

The software is only in italian at the moment.
Thanks for suggesting me possible improvements and bugs. Please report bugs at:
ghinoditacco@hotmail.com