**************************************
***** TI Draw and TI Text Readme *****
*****       By TehBlueBlur       *****
**************************************

   This is the most compresvive TI-83 Plus Graphis program. When
used with the Screen Shot maker (not included and by some one 
else) making program, this program can be used to make pictures 
for use with another program. These programs were made on the 
TI-83 Plus Silver Edition, so they may be slow on a non- Silver 
Edition calculator. You've been warned. 

**********************
***** File Stats *****
**********************

TI Draw
   Program Name: TIDRAW
   Size: 2011 bytes (space is mesured in bytes)
   Speed: good on SE; may be slow on regular Plus
   Purpose: Primary image editor
   Optional: No
   Locked: Yes
   Comments: This is _the_ best image editor!

TI Text
   Program Name: ITTEXT
   Size: 3318 bytes
   Speed: Will work OK on regular Plue calculator
   Purpose: To allow you to easily place text on pictures
   Optional: Yes
   Locked: Yes
   Comments: This is the only program that allows you to place text
             in your image!

Alternating Picture
   Program Name: ALTER
   Size: 202 bytes
   Speed: all right; not fast but not too slow
   Purpose: Makes alternating black/white image
   Optional: Yes
   Locked: No
   Comments: Be patient.

Black Screen Maker
   Program Name: FILLSCR
   Size: 112 bytes
   Speed: same as prgmALTER
   Purpose: To fill the screen in all black
   Optinal: Yes
   Locked: No
   Comments: Be patient.

Sample Picture
   Program Name: WRDPIC
   Size: 800 bytes
   Speed: N/A
   Purpose: Sample picture program made with Screen Shot Maker
   Optinal: N/A
   Locked: N/A (is an Asmbly program)
   Comments: To use this, you must hit "2nd" then "0" and select from
             the menu "Asm(". Then select the program WRDPIC.
             These are sample word pictures. Try and find what they mean.

Pending program: Picture Saver
   Program Name: TISAVE
   Size: Pending
   Speed: N/A
   Purpose: Save pictures
   Optional: Yes
   Locked: Pending
   Comments: This program will be used to save pictures. THIS PROGRAM
             IS PENDING; IT WILL BE ADDED LATER!


******************************
***** Using the programs *****
******************************

***** TI Draw *****
   First, upload prgmTIDRAW to your calculator. Then run it.
You will see a title screen. Hit ENTER. Then you will see the "Keys?"
menu. Here you select the set of keys you would like to use. The arrow
keys option uses the following setup:
   Move up: ^
   Move down: v
   Move left: <
   Move right: >
   Black line: 2nd
   Erase: MODE
   Move freely: DEL
   Clear screen: STAT
   Invert: X,T,O,n
For the NUM pad option:
   Move up: 8
   Move down: 2
   Move left: 4
   Move right: 6
   Move up and right: 9
   Move up and left: 7
   Move down and left: 1
   Move down and right: 3
   Black line: )
   Erase: (
   Move freely: ,
   Invert: ÷
   Clear Screen: 5
If you choose "All" you can use either.
For the Menu, just hit "Y=". You can select from "Random: On", which which 
turns random pictures on, "Random: Off", which turns randon pixels off,
"Random: Change", which inverts random pixels (I have probitly program
that can mesure how many pixels are on and off.), "Change MODE", which
lets you change what mode you are using, "Programs...", which leads to 
the extra fuction menu, "Help", which gives you simple in-program help, 
and "Back", which returns you to the program. To end the Random pixel
fucton, just hit any key. In the programs menu, "*Fill Screen" leads to
the fill screen program, "*Alternating" leads to the ALTER program, 
"Invert" inverts the screen (be patient!), "Back" returns you to the main
menu. 
NOTE: A * means that it is an external program!

***** TI Text *****
   First, select where you want your text in the TI Draw program. Use then
programs menu to then select TI Text program. Then just hit the keys as 
though Alpha lock was on. To switch case, hit Alpha. To do numbers and 
letters, hit 2nd. From symbol mode, MATH will insert more symbols,
2nd will go to Caps letters, and Alpha will go to lower case letters.
While in symbol mode, use the arrow keys to move and Y= to invert a pixel.
Hit CLEAR to return to TI Draw. If you run TI Text with bad X/Y corrds,
TI Text will display an error message and quit.

[The other programs do not need any user input. Just run them.]

*******************
***** Contact *****
*******************
E-mail: tehblueblur@netscape.net
AIM: TehBlueBlur
IP: Just kidding