For a formated and more printable version, see "Manual.doc".


Screen Reflector v1.0
By Frode van der Meeren
10.September.2009


Overview:

Screen Reflector v1.0 is a program designed to take one or two piece(s) of the display
screen and apply it to the rest of the screen in a mirror-like way. The user also got
the ability to force symmetry, and to select what parts of the display that are going
to be used as source for the mirroring.



Usage:

Before running the program, make sure there is a picture on the graph-screen. You do
this by pressing the "GRAPH" key. If there is no picture there, you have to apply one
(either by using a pre-stored picture variable, a program or simply draw a picture
yourself). If there is a picture there, and you want to use it, you are ready to start
the program.

Starting the program is easy. Press "PRGM", and scroll until you find "SCRFLCT". Move
the pointer over the name, and press "ENTER" twice.

When the program has started, you will first see the main menu. From here, you can select
one of six options. Two of these options are special, and that is "Information" and "Quit".
Selecting "Information" displays a brief description, and "Quit" simply closes the program.
The remaining "Reflect" options are the main functions of the program.
 
When you select one of the four "REFLECT" options, the program will start off making the
lines of symmetry. If you selected "REFLECT 1/2", you will be able to use the arrow keys
to toggle between vertically or horizontally mode (confirm with "ENTER").

The next thing to happen if you selected "REFLECT 1/2" or "REFLECT 2/4" is that you will
get the question if you want symmetry activated or not. Only the "REFLECT 1/2" and
"REFLECT 2/4" options will ask you about this, as non-symmetry is impossible to achieve
by the "REFLECT 1/4" and "REFLECT 2/8" options.

Then comes the point where you have to select one or two of the parts. Those selected parts
are the parts that will be reflected onto the display. Use the arrow keys to scroll through
the parts, and the current part are indicated by an inverted square. Press "ENTER" to select
the current part. For "REFLECT 2/4" and "REFLECT 2/8", you have to select a part number 2.
This is done the exact same way as you selected the first part except that you got different
parts to choose between.

Now the program will render an image based on the information you typed into the program. This
may take some minutes, and you may do something else while you wait. When it is done, it will
say "DONE". Then you can see the result by pressing "GRAPH". The resulting image is also stored
in the variables "Pic1", while the original source image is stored in "Pic2".



Final words:

I really hope you like this program, and that you may find it useful. This program is freeware,
which means that you can share the program as long as you do it for free.

If you find any bugs, please send a report to the email address below.



Contact Information:

fvdm1992[ -at- ]yahoo.no