Font Set: WipeOut III [3]
********

 _____________________________________________________________________
|	This Program was made on/using the MirageOs program,           |	
|	OCFE (Omnicalc Font Editor), to be used with Omnicalc	      |
|	Version 1.00 or higher for the TI-83+ Graphing Calc	      | |	Soooo, **NOTE**: I-DID-NOT-PROGRAM-THIS-FONT,-I-MADE-	      | |	IT!					    ^^^^^^^^	      |  ---------------------------------------------------------------------

PrgoramName << : << WOIII.8xp	:D / :))

Description:	The Font style from the [original/first] PlayStation 		game, Wipeout 3.

Installation/setup:	
		
		First you need omnicalc >= v1.00, [found on ticalc 		website (www.ticalc.org/)] Great, now you send the
		prgm, woiii.8xp to the calc (83+), make sure you 
		have all the required hard-and software (i.e. TI G-
		raph Link Program[or TI Connect], TI Calc. <-> com-
		puter graph-link cable[and hook-up], etc.) and 
		there you have it, run Omnicalc (from apps menu)
		[First] select '1', Install, then select '3', Font Sets.
		Move side to side to select font types, [and] up &
		down to preview the new font style characters, press
		enter to select the font you want and clear to exit
		selection, now choose '4', Quit and now you have a 
		new font style to go to math with.

Contact:		You know the drill, .........

	q_dmc12@yahoo.com


1201 EST
08/20/03