Re: TI-H: Place

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: Place
From: Grant Stockly <gussie@alaska.net>
Date: Mon, 22 Mar 1999 15:56:37 -0900
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
Delivered-To: ti-hardware@lists.ticalc.org
In-Reply-To: <01b101be74aa$9e584580$39adecd0@root>
Reply-To: ti-hardware@lists.ticalc.org


>hmm so it sounds like you have quite a few versions ;)

There is ONE board.  Those many files can be linked together using Protel
to produce one PCB.

>apparently working with the filesystem is easier...so I have been told
>yes we know its more expensive...

Not at all.  The type of hard drive has absolutely nothing to do with how
you access the filesystem.  They both use the same type of commands and the
same block transfer size...

>oh realy?  we are not useing the mega for the scsi controller,
>we are actualy useing a SCSI controller chip, I forget which one...
>not my department realy =]

Its probably an NCR chip.

Remember that with IDE the controller chip is ON THE DRIVE.  You need no chip.

Save yourself the trouble and just use ide.  It will save you time...

References:

Re: TI-H: Place

From: "Ryan Pogge" <pogge@shore.intercom.net>

Prev: Re: TI-H: Place
Next: Re: TI-H: Place
Index(es):
- Main
- Thread