Re: TI-H: Arrrrrrrrrrrrrrrrrhhhh!!!! HELP!
[Prev][Next][Index][Thread]
Re: TI-H: Arrrrrrrrrrrrrrrrrhhhh!!!! HELP!
Justin (JUSTIN18@geocities.com) wrote:
>1) When opening the case to turbo it the screwdriver cut the y-axis display
>ribbon in half so #i only have 1/2 a working display. All the webpages said
>be careful of this when soldering but none mentioned when opening the case!
>They say it is irreplacable but there must be a way! If not then can I buy
>the top board as this would be easy to replace.
You're screwed. There is no way to replace it. You can't order a new
display either. If your warranty's still good you might want to send it
back to TI. If it's out of warranty TI charges $50 to replace it.
>2)After being turboed the calc works much faster ( but with 1/2 display!).
>Trouble is I am having trouble useing the parallel link which worked fine
>before. Is this because of the turboing or maybe something to do with the
>display?
You can't have the calc on turbo if you want to transfer files
efficiently. That's why you install a switch so you can have it on
either speed.
--Brian
_________________________________
Brian Watson (pilotcar@iserv.net)
AIM: Moofit
_________________________________