Re: TI-H: TI-MemSwitch
[Prev][Next][Index][Thread]
Re: TI-H: TI-MemSwitch
>I didnt say directly did I? the traces conect some of the leads directly
>together, and some connect the new chip to the pins where the ROM modual
>goes... exactly the same as the guy did with his 92.
>so why are you saying it wont work... someone has done it already and it
>works fine.... you dont know what you are talking about.
I know perfectly well what I'm talking about. I've seen his site. I know
it will work, but if you try to add more than 256k, it won't work. You
didn't word your e-mail in an understandable format obviously. I also said
*if* they are connected directly to the pads.
>>You'll run out of address space soon anyway... If the traces directly
>>connected the pads, then TI has some bad engineers...
>>
>>>I just opened my 1.4 version... the board has a different ram chip its
>a
>>>SONY cxk581000aym-70ll
>>>******BUT******
>>>here is the interesting point!!!!!!!!!!!!
>>>the chip is labled U10R on the board,
>>>DIRECTLY ABOVE THE RAM CHIP there is an outline and traces for A
>SECOND
>>>CHIP!!!! already on the board... the traces would conect the two
>>>chips(if a second one where soldered in) almost EXACTLY like the
>>>scematics for what that guy did on his page....
>>>Hmmmmm looks like TI was contemplateing adding more RAM to futer 92's
>>>but never did it.....
>>>hehehe VERY interesting :0
>>>
>>>
>>>
>>>
>>>>> it IS possible to add more RAM but none has done it yet,
>>>>
>>>>i think someone did it for a TI-92...
>>>>here's the link: <A HREF="http://www.daewoo.fr/~jjm/ti92.html">TI92
>>>MEMORY
>>>>UPGRADE</A>
>>>>
>>>
>>>
>>>______________________________________________________
>>>Get Your Private, Free Email at http://www.hotmail.com
>>
>>
>>
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com