Re: TI-H: MMOD port on EII and cases
[Prev][Next][Index][Thread]
Re: TI-H: MMOD port on EII and cases
I'm assuming this is for those poeple who don't get have a builtin EII with
a new case? I think i read in one of the previous posts (too lazy to look)
that your case design has a knock-out for the MMOD's, right? Also, PLEEEASE,
get a mold made of those things soon - i wanna buy one of those cases.
Also, Grant - what's the status of the EII driver/hardware/firmware? Last i
heard, the hardware was basically done, the firmware was almost working, and
the driver was in beta. Any updates since then?
-- Jon Olson
-----Original Message-----
From: Richard Piotter <richfiles1@hotmail.com>
To: ti-hardware@lists.ticalc.org <ti-hardware@lists.ticalc.org>
Date: Thursday, March 05, 1998 4:10 PM
Subject: TI-H: MMOD port on EII and cases
>
>I'm going to be building SPinTerface EII cartridges with MMOD ports. The
>MMOD port (Memory MODule) holds the memory chip of the EII. The EII is
>just the AVR then. I'm going to let the MMOD be used on the new cases as
>well. Also, if people want to build them themselves they can. I'll also
>allow the MMOD port to be used on link port versions of the EII! If
>Robert Brack wants to, He can build MMOD versions of the link EII for
>those who don't want the SPinTerface port and I'll generaly stick with
>the SPinTerface MMOD EII. If that sounds OK to everyone, then great!!!
>
>Thanks!
>
>Richard piotter
>richfiles1@hotmail.com
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>