TI-H: Accelerating 86

To: <ti-hardware@lists.ticalc.org>
Subject: TI-H: Accelerating 86
From: "Andrew Boudreau" <johnpb@keynet.net>
Date: Wed, 4 Mar 1998 16:22:10 -0600
Reply-To: ti-hardware@lists.ticalc.org


For accelerating the 86 is it pretty much as you have to do to the 85
except a different capacitor if you use a switch.  Looks a little harder to
desolder the c13.

Can you set it up like this you turn the chip sideways. like to the right
.. and solder it to the top part and a wire off the other side of the c13
and to the bottom old spot were the c13 use to be?  Then First spot to left
side of the switch, Second spot to middle spot on the 3 spot switch.
<johnpb@keynet.net>
andrew

Prev: Re: TI-H: EL lamp offer -- Only One left!
Next: Re: TI-H: Modified TI calcs on SAT type tests
Index(es):
- Main
- Thread