Re: TI-H: New cases
[Prev][Next][Index][Thread]
Re: TI-H: New cases
I would have to disagree on that one.
I want one for my 92 first. I think also that as far as hooking up an
color LCD to a calc.. why not the 92? i mean it alraedy has the LCD
connector built right in.
>>i will be making them for ALL calcs, 86 and 92 1st.
>
>The TI-92 has plenty of space, and I think it should be worried about
>last. The TI-82 and 85 can have one case, and the TI-83, and 86 can
>share a case. Start with those. If done properly, you can have a
generic
>rear panel and a front panel, one to fit the TI-83/86, and the other
for
>the TI-82/85. You can skip silkscreening by mounting the original front
>half of the calc onto a large hole in the front mold, and then screw
the
>back mold onto the original front panel. two larger screws on the top
>side of the back panel, or tabs, and you have a great case. Look at my
>post "GREAT looking case!!!" I drew it there. The reason two front
molds
>are needed is the 82/85 have a flat squarish case, and the 83/86 have
>the rounded case. I can even draw up extremely detailed drawings and
>send them to anyone who want's to examine them.
>
>do the 92 last, since it's already too big to fit into a pocket! It has
>quite a bit of space!
>
>The 80 and 81 don't need one since they can't realy be upgraded with
>anything decent.
>
>Richard Piotter
>richfiles1@hotmail.com
>
>The Richfiles TI Page
>http://www.geocities.com/SiliconValley/Lakes/5081/Richfiles.html
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com