Re: TI-H: 2.5mm

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: 2.5mm
From: "Tomislav Filipcic" <tojo@SoftHome.net>
Date: Tue, 28 Jul 1998 22:14:53 +0200
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
In-Reply-To: <35BDE909.F811655C@flash.net>
References: <Pine.PCW.3.96.980727073639.3806G-100000@MICRON> <35BDE909.F811655C@flash.net>
Reply-To: ti-hardware@lists.ticalc.org


On 1998.07.28, at 11:06, Bryan Rittmeyer  wrote: 

>Greg Hill wrote:
>
>> is it a 2.5mm plug, or a 3.5mm (1/8 inch, common on consumer headsets)
>> plug? Sounds like it's bigger than 2.5mm if the metal won't even go in. If
>> that's the case, I think Radio Shack has a 2.5mm to 3.5mm adapter plug.
>
>You need to be careful with the converter, because it has a metal lip
>on it that the TI<->TI cable lacks. The TI cable doesn't use stereo
>plugs (which is what the adapter has) and as such the radio shack
>adapter could damage your link port.

I would like that I can plug my E2 directly into the link port, so it doesn't hang
on a piece of wire. 

Has anyone tried using a file on the 2.5mm connector so it fits?



-----
Tomislav Filipcic
tojo@softhome.net

References:

Re: TI-H: 2.5mm

From: Greg Hill <gregh@xmission.com>

Re: TI-H: 2.5mm

From: Bryan Rittmeyer <bryanr@flash.net>

Prev: Re: TI-H: unsubscribe mangoman43@hotmail.com
Next: Re: TI-H: E2 Resonator
Index(es):
- Main
- Thread