Re: TI-H: E2 memory chips


[Prev][Next][Index][Thread]

Re: TI-H: E2 memory chips




Or you could use the six module port lines, but that'd
get a little bit messy since the firmware controls the
chip select line when it does SPI. It's possible,
but you'd have to cut the dedicated CS line going to
the normally used EEPROM.

Bryan

Grant Stockly wrote:
> 
> >> From: Bruce Christensen <bruce@iname.com>
> >> Date: Wednesday, July 22, 1998 3:20 PM
> >
> >> One last thing: I just spent over $250 on these chips.  They're basically
> >> useless to me, unless I get 26 expander orders.  So please, buy the
> >memory
> >> chips!  If you don't, I have a bunch of great chips that I can do
> >basically
> >> nothing with.  (I don't have 26 calculators! :)
> 
> make a second AVR that selects the CS line so you can have paged memory...
> You'd have to use a switch, but it would be real cool...

-- 
Bryan Rittmeyer
mailto:bryanr@flash.net
http://www.flash.net/~bryanr/


References: