Re: TI-H: WTran8: Help!!!
[Prev][Next][Index][Thread]
Re: TI-H: WTran8: Help!!!
Sorry about that. I meant the link was described (like in the filename) as for a
92. I'm using an 83.
I'd attach the graphic, but I'm not sure of the list's rules.
Bruce Christensen wrote:
> On Monday, January 19, 1998 5:33 PM, Adam Liette [SMTP:kb8ydx@geocities.com]
> wrote:
>
> > Hello all. I subscribed to the list several months ago, but subscribed
> > again for a big reason. I finally got a TI-83!! But, however, I'm
> > needing help with the W(in)Tran8 software and a TI-92 (only described
> > as. Supposedly works with most) parallel interface. When the Calc stops
> > and says Transmit Error, does this mean the link is working, and the
> > software is configured incorrectly, or Do I have something else wrong? I
> > think I have the Win.Ini entry correct. par=1 and port=0x378 for Lpt1.
> > I'm really hoping that I don't have to tear into my interface (DB-25).
> > Oh, the connection to the calc is just the corresponding wires to the
> > parts of the plug on one end of the link cable and the other end plugged
> > into the calc. Does a short cause this?
>
> If I understand your correctly, you're trying to use WTran8x with a TI-92. The
> full name of Wtran8 is WTran8x, as in Windows Transfer for a TI-8x. Note the
> 8x, like 82, 83, 85, and 86. Not TI-92. Download WinLink92 from
> http://www.ticalc.org/linking/ and use it with a 92.
>
> Sincerely,
>
> Bruce
>
> --
> Bruce Christensen - mailto:bruce@iname.com
> TI Calculator Link Cables - http://www.calamistrum.com/visualdesign/link/
> Get a TI-GraphLink-like cable for less than half the cost!
--
-----
Adam T. Liette
kb8ydx@geocities.com
http://www.qsl.net/kb8ydx
ICQ: 4651859
References: