Re: Linking TI-86 to TI-86


[Prev][Next][Index][Thread]

Re: Linking TI-86 to TI-86



You might want to try and press it in even harder---that's what I did and it
pushed in!  I was surprised to see how far it needed to be pushed in
Modem Boy wrote in message <347A2C94.45FF@hehe.com>...
>T Owad wrote:
>>
>> >one thing you might want to do is really put the link cables into the
>calcs,
>> they can cometimes go even further than you think, it is a common >error.
>>
>> Ok, I hooked the two cals toghether and made sure they were both
connected very
>> well.  Now I have another problem.  My TI-86 freezes whenever I plug it
in the
>> entire way.  The cursor just stops blinking and I can't do anything.
When I
>> unplug it the calc starts working again.  Can anybody help me here?
>>
>> Thanks,
>> tom
>Defective cable. Either buy one from TI, borrow one from a friend, or
>make your own. (or just annihilate your current one, use the 2 2.5mm
>plugs from it and make the cable with some new wire.)
>
>-(: Modem Boy :)-
>-(: -=TI-86=- :)-


References: