Re: NEWBIE NEEDS HELP WITH PARALLEL LINK


[Prev][Next][Index][Thread]

Re: NEWBIE NEEDS HELP WITH PARALLEL LINK



Try it on an older computer, say a 486SX before smashing it. Mine won't
work on my P133 or 286, but works fine on my Packard Bell 486.

                                -Marco


On Mon, 26 May 1997 19:25:21 -0400 dave <rattle-n-hum@JUNO.COM> writes:
>Today I built a parallel link for my ti85, as per adreas wesfeld's
>(sp?)
>directions.  Unfortunately it won't work at all.  I've checked over
>the
>cable itself throughly and it is constructed completely correctly (no
>backwards diodes or anything like that).  I am running Win95 on a
>pentium 90 wirh 24meg o ram (if that matters).  I've tried every link
>prog i could find on the web, to no avail.  The one thing that could
>make a difference, but i don't think it does, is that i hooked a 1/8"
>plug into a 3/32" adaptor for the calc.  Note i used the 3 conductor
>stereo kind; it is probably exactly the same as the link that comes
>w/the calc. Anyone know what could be the problem before i samash it
>into a million little pieces.
>


References: