Re: 85 home made link question
[Prev][Next][Index][Thread]
Re: 85 home made link question
I think there's an order to plugging in, for my ti92 I open winlink,
turn on calc, *then* connect. go to ticalc, links, software and read
instructions. For the ti92, there are specific instructions about
order, I think. I don't know about the 85.
-Jesse
>Date: Tue, 29 Jul 1997 01:21:34 -0700
>From: Geno Bisceglia <gmbst27+@PITT.EDU>
>Subject: 85 home made link question
>To: CALC-TI@LISTS.PPP.TI.COM
>
>I used a multimeter and tested the lines because of my problem (the
>calculator is freezing, even after I start link85xp.exe)
>
>When the link is not plugged into the 2.5mm socket, the two wires read
>0.00 volts.
>
>When I plug in the link it reads 0.5 volts. When I send a program using
>the link85xp program it reads around 1.1 volts.
>
>But what i don't understand is when I plug in the link into the socket
>and then into the calculator, the calculator freezes up.
>
>PLEASE HELP ME!!!!! I AM FRUSTRATED!
>please reply via email too :)
>
>gmbst27+@pitt.edu
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com