Re: Serial Port(92)? (fwd)


[Prev][Next][Index][Thread]

Re: Serial Port(92)? (fwd)



Ahhh....but in asm, it can be used as a parrelll, or am I incorect?  I
thought you can change all the regesters for the wires, you know, like
set one wire to send a 1 and another to send a 0 and another to send 1 or
what ever combonation...


-Paul bruner




On Thu, 31 Oct 1996, P. Kolbus wrote:


> Nope... the TI port is serial... 1 data, 1 ACK, and 1 ground.
> At 08:04 10/31/96 -0600, Chuck Slaustas wrote:
> >>What is the serial port on the top of the 92 used for?
> >>
> >>What will it be used for?  I think it would be cool to have a Ti-Ti
> >>serial link, much faster transmission...
> >>
> >>wyrm@csd.uwm.edu
> >>
> >>
> >Actually the 2.5mm Ti port is a 3 channel parallel comm connection.
> >rs-232 serial is one channel.  the TI port would and is faster....
> >
> >
> +--------------------------------------------------------+
> | Peter Kolbus                           +1.810.474.0872 |
> | ae607@detroit.freenet.org      #include <disclaimer.h> |
> +--------------------------------------------------------+
> | Due to financial difficulties, the light at the end of |
> |   the tunnel has been permanently disconnected.        |
> |                                                        |
> | The packet goes out the card, into the copper, out     |
> |   the router, onto the fiber, across the world, thru   |
> |   the copper............       NOTHING BUT NET.        |
> |                                                        |
> | ***Written using 100% recycled electrons***            |
> |         *** (80% post-consumer) ***                    |
> +--------------------------------------------------------+
>


References: