|(Parent Dir)||folder|| ||Up to TI-83/84 Plus BASIC Graphics Programs|
Fully Accurate 3D Rotation! Rotates any point in 3D! Supports Full Shapes!
|3dcuberotator.zip||21k||06-10-15||3-D Cube Rotator|
This program lets the user rotate a 3-D cube vertically and horizontally.
|3dfx.zip||1k||02-01-01||3dFx Developers Draw Tools V1.00|
Program that lets you draw circles, text, and the basics with graph input, quick file save and load, animations, and custom filters and an attempt to create 3d graphics on the calculator. Pictures are stored in pic0-9 slots and can be used for programs
A 3D grpahing program... input the function and oooh and aaah, wishing that everybody was a purple monkey...
This is the only 3D maze program for the TI83+ in BASIC. The graphics are absolutely beautiful. Included in the zip file is an editor program which you can use to create your own mazes of any size. This is by far the fastest 3D program ever written in BASIC. The graphics for the walls were expertly designed by Nick Bernier. Up to ten mazes can be saved on the calculator at one time. Please do not email me with comments or problems.
|3dmodelv1.1.zip||10k||04-09-09||3D Model v1.1|
This is a complex 3D program that graphs the wire frame of a sphere of 84 three-dimensional vertices. Modified GUI from previews version 1.0 real3dmodel.zip Hot! Hot! Hot!
|8vertexpolygondrawer.zip||1k||10-06-25||8 vertex Polygon drawer v0.1|
You can input 8 x,y, and z coordinates and the program will draw a polygon according to the x,y,z lists. You can then use the up down left and right keys to rotate it on the x and y axises. Note: vertexes 1 and 4, 2and 5 etc. are connected by lines, as are 1 and 2, 3 and 4, 7 and 8, etc. This was my first ever basic program.
|a3daxes.zip||1k||04-02-17||true 3d (BETA)|
This is a z-axis emulator that can support multiple polygons, to form 3d shapes!!! There are a few glitches but this is only a beta version. And this is not some dumb fake; you can actually change the object or view it and move around it! The real thing will have many 3d objects!!! or you can make your own objects!
|a3dview.zip||7k||03-12-11||3D WireFrame Viewer|
I Believe this is the 1st and only BASIC program of it's kind. This program actually views any 3D WireFrame object that you can come up with. The demo object is just a dumb cube; it can do MUCH better. It has a very good GUI and UI. In the future, I plan on making the format of the object more efficient and releasing it with some complex car models, and making a simple editor for it.
|advmodel3d.zip||578k||15-02-04||Advanced 3D Modeling|
This is an advanced 3D modeling program for the TI-83/83+ that doesn't require any manual matrix manipulation. You simply sketch a profile and select whether you want to extrude or revolve that profile similar to a real 3D CAD program. You can sketch lines, circles, and 3-point arcs. Now you can create cubes, arches, spheres, and much more.
Argon is a 3D graphics program for the Ti-83 Plus. It has an easy-to-use GUI or a command line interface. It has three saved files and one RAM file. Argon can draw lines, spheres, cylinders, cubes, and squares. Version 2.1 now includes a render engine: You can render your creations in orthographic or perspective view and move around and through them. This also includes a file compressor, for making your files smaller and a manual editor, to edit the raw data in the Argon files. Hopefully Argon 3.0 will be an application, possibly with the ability to render movies.
|basic3dmovablecube.zip||2k||09-10-22||3D Movable Cube|
This program renders a 3d cube on the TI's screen and allows user input to move the cube up/down/left/right/forward/backwards. It isn't much but has potential to go further. The user can also change coordinates of the cube to create alternate shapes.
|basic3d.zip||18k||09-02-08||BASIC 3D Package|
Renders 3D images from a list of polygons. Includes programs for Wireframe and shaded. Using it can be confusing, so be sure to read the documentation.
You give it a 3x3x3 cube with some cubes missing; it makes an even bigger 3x3x3 cube with the 3x3x3 you give it as each of the 27 cubes, the corresponding ones missing (result is a 9x9x9 of a pattern of a pattern drawn in fake-3D, Z-scewed down the X and Y axes); it's recursive, you just have to see the pictures at least!
This program generates a cool 3D cube that you can zoom in and out around using a stat plot
|cool.zip||1k||04-03-08||3D Art Renderer|
Remember long ago, making those 3D stars with a ruler and pencil, and impressing everyone who saw it? Well, I just recently made a program that draws it for you, almost instantly. There is also a bonus program included that draws the star split and aligned along the corners to look like an eye socket. Check out the screenshots!
This is a same version of Cube3Dfps for TI-82. This program include a FPS calculator. Now for TI-83+ !
Just a 3D cube.
This is just a program that creates the illusion of a rotating cube. I'm hoping someone will figure out how to use this (in basic or ASM) and make 3D games. Thanks to Kerm Martin for the rotation formula (even though he doesn't know I used it.) Enjoy
A 3D wireframe rendering program.
|d3dcalc.zip||1k||04-03-28||[Design 3D v1.0+] Calculator v1.0|
This is a ti-8x calculator in Design 3D 1.0 and up format. USing Design 3D, you can edit, rotate, zoom, and publish files such as these. Doors CS v4.0 and up optimized.
|d3dcam.zip||1k||04-03-28||[Design 3D v1.0+] Digital Camera|
This is a digital camera in Design 3D 1.0 and up format. Using Design 3D, you can edit, rotate, zoom, and publish files such as these. Doors CS v4.0 and up optimized.
|d3dhcube.zip||1k||04-03-28||[Design 3D v1.0+] Hypercube|
This is a hypercube in Design 3D 1.0 and up format. Using Design 3D, you can edit, rotate, zoom, and publish files such as these. Doors CS v4.0 and up optimized.
|design3d3.zip||124k||10-08-15||Design 3D v4.2 (for TI 83/84plus only)|
Design 3D is one of the biggest and most powerfull 3D editor availble for the TI-83/84plus. It's easy to use, and it has more features than you can dream of. In fact, you can easily make your own features if you are a little skilled in TI-BASIC. Some of the features in Design 3D is a 16-page user manual, an on-calc fully featured help file, 7 saveslots, 5 render modes (including Perspective), both a visual and table-based editor, 3D rotation, the ability to make a 10-frame animation and a ton of other features! With a RAM requirement of only 4000 bytes (thanks to module usage), it is well worth a try.
|design3d.zip||2k||04-03-27||Design 3D v2.0|
Design 3D v2.0 is a CAD 3D program for TI calculators, an upgrade of v1.0. In addition to creation and rotation of objects with up to 999 points in 3D space, it now supports better file swapping (up to 5 3D files can be saved at a time), oncalc help file, panning and zooming in both editing and viewing modes, and wireframe. For editing ease a table edit mode has been added and the edit tool now shows realtime coordinates onscreen. Finally, you can now create and view animations up to 10 frames long of your 3D creations in rotation. Doors CS v4.0+ optimized.
|draw3d.zip||33k||07-02-17||3 Dimensional Real-Time drawer|
This program allows it's user to view fully tri-dimensional objects, rotate them, move them, view them with perspective and isometric modes. You can also edit the object while viewing the changes or even create a new file with the built-in editor! With all the optimizations made, it runs lightning fast...
|engine3d.zip||1k||04-12-09||3d Polygon Drawer/mover/manipulator|
To make something...select create shape, than tell the program how many points ur shap has...then tell the program how many lines (edges) ur shape has. Then input the x, y, and z coordinate for each point, then input the line order....for example...for line one, u might want to enter 3 then 6 to tell the calc to connect points 3 to 6 to make a line. (its easier if u write it out on paper first with drawing the shape) Once ur done with that, select RENDER, and input the horizontal viewing angle, the verticle viewing angle, the window max (based on how big ur object it), and the viewing limit (the distance to the final point of perspect, where everything would generally go to a point)... horizontal angle...when 0...then ur looking at ur object straight, when 90, then ur looking at it for the right, when 180...from the back, 270 from the left....verticle angle works the same way....0 is front, 90 is top, 180 is back , 270 is bottom (these values affect object rotatation)...then once its done rendering..should be a couple of seconds...select draw...and viola...u got ursef a 3d object.. :)...
A 3D Grid on your Ti-83 Screen.. With some 2D Bubbles to blur your visual brain :p
BASIC 3D hallway. Not jerky! I swear!
A faux-3D hallway. Play with the source code as you like. DragonRise
Finally a USER-FRIENDLY 3D model DRAWING tool, where you really draw the lines instead of inputting x,y,z coordinates, though it's possible with Jacob's 3D, too. Now you can also see your model as a 3D stereo image! Filesize is amazing: not even 7kB. Check out the pics and the readme, download and enjoy! (v1.2 - Stereo view and guide axes added.)
|lifekeeper.zip||4k||03-03-10||Life Keeper 3D|
A nice life keeper for Magic the Gathering and Yugioh card games.Visit my site at http://mmps.pk9.net/
|maze3d.zip||10k||06-01-04||3D Maze Rendering Engine|
A 3D maze rendering engine with great rendering speed. Usable as a subroutine in any program.
This is a simple 3d rendering program for the TI-83+. No known errors at this time. Version 2.0 features a decreased file size and a 54% speed increase, enjoy!
This is my first 3D engine ! You can just rotate the cube. Now for TI-83+ !
A simple raycasting engine that needs something to make i faster. Please check it out and make inprovements. Read the Text file.
|real3dengine.zip||4k||03-05-21||ReaL3D Engine v2.0|
This engine will draw lines in virtual 3D space. It can be used as a standalone program or included in other programs. I have no updated it to contain both the calculator files and the code necessary for loading into the calculator. I also included a sample 3D file of a cube. Check it out!
|real3dmodel.zip||6k||04-09-03||REAL 3D MODEL|
REAL 3D ROTATION OF A MODEL MAKE YOUR OWN REALLY EASY. PLEASE DONT COPY, BUT LEARN
|render3d83p.zip||19k||03-10-19||Render 3D v1.1|
Render3D is a solids-rending engine for the TI-83 and TI-83+/SE. Using lists X, Y, and Z, the user can create multiple interactive 3D objects and environments which can be rendered on the calculator. This tiny program supports several different textures (editable by the values in list R) and includes a sample file to show how to use it. It will soon be included in CAD3D programs such as Design3D v2.0. Check it out!
***FINAL VERSION** You can create a sketch from lines, circles, and arcs then extrude them into 3D objects! Very easy and fun to use. See the documentation for more details.
|spheregen.zip||1k||11-09-13||Sphere Generator expansion module for Design 3D|
This is an expansion module for Design 3D that makes it easy to add perfect spheres to your 3D models. To use this module, you will need version 4.2+ of Design 3D.
the result of much boredom... add shapes like polygons, circles, ellipses, etc. and change their depth, then press graph and be amazed!!! they become 3D!!!!!!!!! check out the screenshots below and download now!!!
with wire X you can start making a wire frame by just typing an X and a Y (really easy to use)