[TI-H] Re: TI-83 Parallel link cable


[Prev][Next][Index][Thread]

[TI-H] Re: TI-83 Parallel link cable




my parallel cable works perfectly, with 83+, TiLP, silent linking (did you
use that?)

> i had the same problem a while ago, i found the parallel link was very
> unreliable (even though it is the simplest and cheapest) it olny seemed to
> work proprly and reliably with the ti-82, luckly for me i got the ti-83+
> and
> a free black link cable from ti
> arnt i luky? so now dont need to worry bout the link
> ----- Original Message -----
> From: "Tristan Schaap" <tristanschaap60@hotmail.com>
> To: <ti-hardware@lists.ticalc.org>
> Sent: Sunday, September 01, 2002 9:46 PM
> Subject: [TI-H] Re: TI-83 Parallel link cable
> 
> 
> >
> > I tested it on the test program from the ti-calc.org site, and a program
> > called CAL. I've already tried 1. Removing the resistors from the design
> 2.
> > Replacing the batteries in the TI-83. (The test program from the site
> works,
> > but not all of them work. The screen capture doesn't work (Times out)
> the
> > LC85 program works fine, and the TEST program works fine too).
> >
> >
> > >From: "David Phillips" <david@acz.org>
> > >Reply-To: ti-hardware@lists.ticalc.org
> > >To: <ti-hardware@lists.ticalc.org>
> > >Subject: [TI-H] Re: TI-83 Parallel link cable
> > >Date: Sun, 1 Sep 2002 05:55:25 -0500
> > >
> > >
> > >Tristan Schaap writes:
> > > > I just built a link cable (The parallel version from the site), but
> > > > I'm having some trouble. According to several programs, the link
> > > > cable is fine. But when I try to send it gives an Error in Xmit
> > > > error. If I try to send a file from the calc to the PC it gives the
> > > > same error on the calc, and a 'Header too large' error on the PC.
> Can
> > > > anyone please help me with this? (I've also tried using different
> > > > comps, a P90, a P120 and a PIII900)
> > >
> > >Your question is lacking some crucial information.  Which programs make
> you
> > >think the cable is fine?  Which program gives you the error message?
> > >
> > >Be aware that you cannot use the TI software with a parallel link.  You
> > >must
> > >use special link software that has support for it.
> > >
> > >--
> > >David Phillips <david@acz.org>
> > >http://david.acz.org/
> >
> >
> >
> >
> >
> >
> 
> 

-- 
Groeten,
    Ronald Teune @School
    http://www.zeekoe.tk
    http://www.nietszeggend.cjb.net (niet van mij, wel een aanrader)
    Anything that's good&useful is made of chocolats

GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net




References: