[TI-H] Re: TI-83 Parallel link cable
[Prev][Next][Index][Thread]
[TI-H] Re: TI-83 Parallel link cable
i had the same problem a while ago, i found the parallel link was very
unreliable (even though it is the simplest and cheapest) it olny seemed to
work proprly and reliably with the ti-82, luckly for me i got the ti-83+ and
a free black link cable from ti
arnt i luky? so now dont need to worry bout the link
----- Original Message -----
From: "Tristan Schaap" <tristanschaap60@hotmail.com>
To: <ti-hardware@lists.ticalc.org>
Sent: Sunday, September 01, 2002 9:46 PM
Subject: [TI-H] Re: TI-83 Parallel link cable
>
> I tested it on the test program from the ti-calc.org site, and a program
> called CAL. I've already tried 1. Removing the resistors from the design
2.
> Replacing the batteries in the TI-83. (The test program from the site
works,
> but not all of them work. The screen capture doesn't work (Times out) the
> LC85 program works fine, and the TEST program works fine too).
>
>
> >From: "David Phillips" <david@acz.org>
> >Reply-To: ti-hardware@lists.ticalc.org
> >To: <ti-hardware@lists.ticalc.org>
> >Subject: [TI-H] Re: TI-83 Parallel link cable
> >Date: Sun, 1 Sep 2002 05:55:25 -0500
> >
> >
> >Tristan Schaap writes:
> > > I just built a link cable (The parallel version from the site), but
> > > I'm having some trouble. According to several programs, the link
> > > cable is fine. But when I try to send it gives an Error in Xmit
> > > error. If I try to send a file from the calc to the PC it gives the
> > > same error on the calc, and a 'Header too large' error on the PC. Can
> > > anyone please help me with this? (I've also tried using different
> > > comps, a P90, a P120 and a PIII900)
> >
> >Your question is lacking some crucial information. Which programs make
you
> >think the cable is fine? Which program gives you the error message?
> >
> >Be aware that you cannot use the TI software with a parallel link. You
> >must
> >use special link software that has support for it.
> >
> >--
> >David Phillips <david@acz.org>
> >http://david.acz.org/
>
>
>
>
>
>
Follow-Ups:
References: