Re: Kit Problem-Please read ( was Re: TI-H: backlight...)

To: <ti-hardware@lists.ticalc.org>
Subject: Re: Kit Problem-Please read ( was Re: TI-H: backlight...)
From: "Robert Brack" <robert@brack.com>
Date: Mon, 18 May 1998 20:45:28 -0500
Delivered-To: ti-hardware-outgoing@towerguard.unix.edu.sollentuna.se
Reply-To: ti-hardware@lists.ticalc.org


>I can answer part of this.
>The switches I got from him were about 2-3mm thick, maybe
>6mm long.  They are DPDT.  The actual switch part that you
>operate is about 1x1 mm square, and sticks up about 2mm from
>the surface of the switch, just enough to go thru the casing.
>They can be a bit difficult to operate, depending on where you
>mount them.  I cut a depression around mine so they are easy
>to operate, but don't stick out.  You can see a picture at
>http://www.geocities.com/SiliconValley/Lab/5725


The ones I have are SPDT, and don't need a depression.  4 strokes of a
nibbling tool, and a little glue and they are installed.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__        _     __
|__)     |  |    |__)
|    \      |_|    |__)
robert@brack.com
reb@netride.com
www.brack.org

Prev: Re: Kit Problem-Please read ( was Re: TI-H: backlight...)
Next: Re: TI-H: ti-injector
Index(es):
- Main
- Thread