TI-H: New Case Design


[Prev][Next][Index][Thread]

TI-H: New Case Design




I'm about 95% done with the new case design.  It's the Ti LE case.  You
guys can have a case bigger than 2 ti-92's, if you want, but this case
for the ti-8x series contains only the most 'practical' features.  Will
Definitely Post Tommorow!!!  After all, there can be two cases cant
there?  One for people wanting a semi-advanced version, incorporating the
features TI left out, and your guy's version with lasers, touchpads, DBA,
joysticks...  This is the intermiedeate step.  After all, there are
problby more calcs with minor mods/addons that major accessories.  And,
it will still pretty much fit in a pocket.
Features:
~2.5mm  AND 3.5mm linkports
~IR/RF... type links
~4AA batteries
~9V powered 4 keyboard leds
~Power on and link active LED's
~Speaker and adjustable volume
~Place for Spinterface carts Or link cable storage
~Recesses DIP switch panel to activate/deactivate features 
~RJ-11 style linkport for link cable/ computer link
Dimensions about 1" wider than the ti-82 (dimension across keyboard)
about 1 SPinterface cart taller/ 1 9V battery taller than the upper half
of the ti-82  (Basically, the half covered when the caver is on is the
actual non batterty part of hte calc pretty much.)  Generally, 1" wider
and sits ~1/4" higher on the desk.

~Larry C
Larry1492@juno.com

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]