Re: TI-H: clock and date???

To: ti-hardware@lists.ticalc.org
Subject: Re: TI-H: clock and date???
From: Invalid Media <cooper@fort-frances.LakeheadU.Ca>
Date: Tue, 11 Nov 1997 22:39:12 -0600
References: <v02110103b08e98c919f4@[206.149.127.65]> <3468FD6A.383C@wf.net> <3469062F.74D6@geocities.com> <34691D8E.5800@wf.net> <346923A0.2AE0@geocities.com>
Reply-To: ti-hardware@lists.ticalc.org

Matrix Phantom wrote:

> The unit (I think) also has 2 power lines.  One direct from the
> batteries at 6 volts and anothr regulated from the low-dropout 5v
> regulator from national, that brins the count up to 7 I belive.
>
> Your comment regarding the ground lines is questionable, as well.  I am
> not an electronis genus or anything but I belive it would at least be a
> good idea to keep the lines for calc data seperate from the powered
> lines (correct me if I'm wrong), bringing the count up to 8.

I replaced the 10 pin on mine with 8, leaving one spare totalling 7 pins
needed.... if the ground/- line was used? then you could even knock it down
to a 6 pin connector, but then you lose the one-way-only feature. Check the
orig.....

References:

Re: TI-H: clock and date???

From: gussie@alaska.net (Grant Stockly)

Re: TI-H: clock and date???

From: Pellaeon <gramps@wf.net>

Re: TI-H: clock and date???

From: Matrix Phantom <grahamdrew@geocities.com>

Re: TI-H: clock and date???

From: Pellaeon <gramps@wf.net>

Re: TI-H: clock and date???

From: Matrix Phantom <grahamdrew@geocities.com>