Re: TI-H: Re: Dust behind the screen. Yes , it happens.


[Prev][Next][Index][Thread]

Re: TI-H: Re: Dust behind the screen. Yes , it happens.



>the slip over the LCD screen.  IUf you have a 85 it says TI-85 on it.
>simply use a razor to cut the glue.

Are you serious? Or is it just a lame trick to make someone destroy his
calculator?
This applies to the ti85: Unscrew the 2 screws on the bottom of the
back-side and the one holding the flat battery. Carefully use a small
screw-driver to seperate the bottom-plate from the top-plate, start at the
bottom side, once you got it apart you'll know how the clips works. Now just
follow your instincts, unscrew the display, and maybe you might need to
unscrew the circuit-board also, but you'll see how it's done once you're in
there. (you can remove everything in there by just unscrewing screws, you
wont need a razor!)
>
>----------
>> From: Ian Warner <dagon23@geocities.com>
>> To: ti-hardware@lists.ticalc.org
>> Subject: TI-H: Re: Dust behind the screen. Yes , it happens.
>> Date: Sun, 09 Nov 1997 08:42:27 -0500
>>
>>
>>
>>
>>
>> >Sure simply remove the cover and either get a new one or clean it and
put
>> it
>> >back on! Simply as that.
>> >
>> >John Fraser
>> When you say cover , do you mean the back cover or the front cover?
>>
>> Ian Warner - dagon23@geocities.com - iwarner@ardsen.com
>> "Cocaine is gods way of telling you that you make too much money."
>> ICQ: 4139923
>>
>