Re: TIB: Your problem with the graph link.

To: ti-basic@lists.ticalc.org
Subject: Re: TIB: Your problem with the graph link.
From: KeysDezez@cs.com
Date: Sun, 28 May 2000 22:22:47 EDT
Reply-To: ti-basic@lists.ticalc.org


Same thing happened to me.  I ended up taking my 89 apart to try and fix it.  
It turns out that the port is held in place with glue and three weak copper 
contacts.  Needless to say, it breaks off very easily.  Mine was actually a 
loose part...  Never did get it to work again...

In a message dated 5/27/00 2:56:20 PM Eastern Daylight Time, 
CalebHwrd@aol.com writes:

<< I think the problem is that the graph link is tearing up the inside of the 
 port in your calc.  I've jammed the graph link in and yanked it out so many 
 times that I have to practically hold the thing in and twist it around while 
 it's sending so it can get a good connection.  The regular link that links 
 your calc to other calcs does the same thing.  Just so you know, I have an 
 83+ too, but I think this applies to all calcs.
 
 ~Caleb
  >>

Prev: Re: TIB: help with my ti link
Next: Re: TIB: Your problem with the graph link.
Index(es):
- Main
- Thread