Re: Worn Out Link Port


[Prev][Next][Index][Thread]

Re: Worn Out Link Port



Your best bet would be to disassemble a 2.5 -> 3.5 adapter, and hard
wire it inside in place of the link port. You can completely replace
your link port for only a few cents.

STL137 wrote:
>
> My good and loyal TI-85, is getting sort of old, and use of its link port has
> sort of worn out the metal in it, making the link plugs fit not as snugly. I
of
> course, don't want to stop using the link port, but I don't want to buy a new
> TI-85. I know that male 2.5 to female 3.5 adapters exist (the 2.5 is what
plugs
> into the TI-85), but is there a complementary male 3.5 to female 2.5 adapter
> that I could plug into the first one? That way the second adapter would be
> used...
> Well?
> Thanks in advance.
> ------
> STL137@aol.com  ===>  Website: http://members.aol.com/stl137/
> PGP keys: ~~~pgp.html Quotes: ~~~quotes.html
> "I have sworn upon the altar of God eternal hostility against every form of
> tyranny over the mind of man" - Thomas Jefferson


References: