Re: fixing calc- 83


[Prev][Next][Index][Thread]

Re: fixing calc- 83



On Thu, 19 Mar 1998 04:58:38 GMT, Nathan Smith <smithrh@ESPER.COM>
wrote:

>I have this ti 83 that just stopped working one day and wouldn't turn on.
>And, it was after the warranty expired. So I opened it up to see if there
>was anything I could see and fix it. There wasn't. So I was wondering If
>any of you have things I could try doing. BTW, I used a current testing
>device, and attached the positive end to the positive battery input. I used
>the other end to test areas. The only spot that gave me suspicions was
>behind the LCD on the board. There were some bare parallel strips of metal
>that looked slightly dirty. It was there that the tester didn't register.
>Hmmmmm. I tried to clean it a little, but that didn't do it. Before I take
>a powerful solution to it, what do you guys suggest?
>
>Thanks for reading that long post,
>Nathan

Did you change the batteries?



tram@humboldt10.com
Remove the 0 from address to reply.


References: