Re: A92: again:tiger and romdump
[Prev][Next][Index][Thread]
Re: A92: again:tiger and romdump
David Kühling schrieb:
>
>
>
> Arno Kizina wrote:
>
> > I recently read about how to use romdump here and now tried it (once again
> :-( )
> > with the proposed settings for hyperterminal: direct to com, 9600,8-N-1,
> > hardware-flow-control, Minitel-emulation and it didn't work.
> > I got a romdump of 1198377 Bytes, which is 7 too much for tiger. Any
> > suggestions??
>
> Yes: Load down a hex-viewer for the TI-92, and check weither the beginning of
> the
> ROM-
> dump is ok. (It has to be $00004400). Then check the end. If the beginning is
> correct, and
> the end seems to be ok, too (There should be a lot of $FFFFs), just cut 7
> Bytes from
> the end
> with a hex-editor.
> I had the problem, that I had a $FF at the beginning (So the beginn was
> $FF00004400...).
> Cutting it out helped.
>
>
Thank's, I took a hex-viewer and found :
at the start $9613...
at the end 16 from $ff differing bytes
in my converted rom. I go on trying A.K.
References: