Re: LF: //* H E L P *// modem, fterm PROBLEM!! _PLEASE_HELP_***
[Prev][Next][Index][Thread]
Re: LF: //* H E L P *// modem, fterm PROBLEM!! _PLEASE_HELP_***
Well, you didn't have to post this message 3 times in ONE MINUTE either.
Chad Palmer
palmer@carol.net
At 08:07 PM 12/15/96 EST, you wrote:
>Look. It seems to me that I've seen this message several times over the
>last week or so. If someone had answer to give you, they would have done
>so already. Would you please, please, stop sending that message? At least
>wait longer (seriously, a month sounds like a appropriate period of time)
>between each posting.
>
>
>Thanks,
>Stan Hiller
>
>
>>Subject: LF: //* H E L P *// modem, fterm PROBLEM!! _PLEASE_HELP_******
>>Sent: 12/11/96 8:14 PM
>>Received: 12/12/96 12:14 AM
>>From: Keith, rdkk@oeonline.com
>>Reply-To: list-fargo@lists.ticalc.org
>>To: list-fargo@lists.ticalc.org
>>
>>
>>Problem with FTERM and MODEM setup.
>>
>>Have a:
>>
>> US Robotics World Port
>> 9696 v.42 bis Fax / Data Modem
>>
>> Latest ver of FTERM
>> GREY TI GRAPH LINK
>> Null Adapter & Gender Changer
>>
>>I hooked everything up (correctly), and typed "AT" it said "OK"
>>
>>After trying many different commands, i arrived at the following:
>>
>>The modem will take ANY COMMAND that starts with AT, and say OK
>>
>> ex: ATKDFJDIHGH = OK
>> ATXXXXXXXXX = OK
>> AT<anything> = OK
>>
>>
>>BUT THE MODEM WILL N O T DIAL -- I type ATDT####### and NOTHING
>>
>>
>>I hooked the modem up to my computer, went to PROCOMM, installed it as a
>>new modem, and it worked fine -- dialed and everything.
>>
>>I copied the command string it used, and tried that on the calc - nothing
>>
>>ANY IDEAS?
>>
>>HERE ARE MINE:
>>
>>I am thinking it is something with the modem's DTR setting. Since it is
>>like a compact modem (that CAN use a 9V batt or Plug) it's DTR is funny.
>>
>>I tried the DTR commands, still didn't help
>>
>>The instruction book talks about PIN # 20 for signaling the modem for DTR
>>however this is for the BATTERY mode
>>
>>There is only 4 lights on the modem
>>
>>1) High speed
>>2) Low speed
>>3) Carrier Detect
>>4) Low Battery
>>
>> The carrier detect light is ALWAYS on when the plug is in, but with
>> the battery, it is not....only when you have CD
>>
>>
>>THANK YOU VERY MUCH
>>| / h
>>| / t
>>|/ i
>>|\ e
>>| \ i
>>| \ t
>>| \ h
>>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
>>\\\\ Keith \\\\\ rdkk@oeonline.com \\\\\\\\\\\\\\\\
>>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
>>
>| / h
>| / t
>|/ i
>|\ e
>| \ i
>| \ t
>| \ h
>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
>\\\\ Keith \\\\\ rdkk@oeonline.com \\\\\\\\\\\\\\\\
>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
>
>
>