Re: LF: //* H E L P *// modem, fterm PROBLEM!! _PLEASE_HELP_***


[Prev][Next][Index][Thread]

Re: LF: //* H E L P *// modem, fterm PROBLEM!! _PLEASE_HELP_***



Look. It seems to me that I've seen this message several times over the 
last week or so. If someone had answer to give you, they would have done 
so already. Would you please, please, stop sending that message? At least 
wait longer (seriously, a month sounds like a appropriate period of time) 
between each posting.


Thanks,
Stan Hiller


>Subject:     LF: //* H E L P *// modem, fterm PROBLEM!! _PLEASE_HELP_******
>Sent:        12/11/96 8:14 PM
>Received:    12/12/96 12:14 AM
>From:        Keith, rdkk@oeonline.com
>Reply-To:    list-fargo@lists.ticalc.org
>To:          list-fargo@lists.ticalc.org
>
>
>Problem with FTERM and MODEM setup.
>
>Have a:
>
>        US Robotics World Port 
>        9696 v.42 bis Fax / Data Modem
>
>        Latest ver of FTERM
>        GREY TI GRAPH LINK
>        Null Adapter & Gender Changer
>
>I hooked everything up (correctly), and typed "AT" it said "OK"
>
>After trying many different commands, i arrived at the following:
>
>The modem will take ANY COMMAND that starts with AT, and say OK
>
>        ex:     ATKDFJDIHGH         = OK
>                ATXXXXXXXXX         = OK
>                AT<anything>        = OK
>
>
>BUT THE MODEM WILL  N O T  DIAL   --  I type ATDT#######     and NOTHING
>
>
>I hooked the modem up to my computer, went to PROCOMM, installed it as a 
>new modem, and it worked fine  -- dialed and everything.
>
>I copied the command string it used, and tried that on the calc - nothing
>
>ANY IDEAS?
>
>HERE ARE MINE:
>
>I am thinking it is something with the modem's DTR setting.  Since it is
>like a compact modem (that CAN use a 9V batt or Plug) it's DTR is funny.
>
>I tried the DTR commands, still didn't help
>
>The instruction book talks about PIN # 20 for signaling the modem for DTR
>however this is for the BATTERY mode
>
>There is only 4 lights on the modem
>
>1) High speed
>2) Low speed
>3) Carrier Detect
>4) Low Battery
>
>        The carrier detect light is ALWAYS on when the plug is in, but with
>        the battery, it is not....only when you have CD
>
>
>THANK YOU VERY MUCH
>|  /   h
>| /   t
>|/   i
>|\  e
>| \  i
>|  \  t
>|   \  h  
>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
>\\\\ Keith \\\\\ rdkk@oeonline.com \\\\\\\\\\\\\\\\
>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
>
|  /   h
| /   t
|/   i
|\  e
| \  i
|  \  t
|   \  h  
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\ Keith \\\\\ rdkk@oeonline.com \\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\