Re: LF: RAM upgrade


[Prev][Next][Index][Thread]

Re: LF: RAM upgrade



At 09:31 AM 12/4/96 -0600, you wrote:
>	Somebody said that the RAM chip was already in their calc (ROM
>1.7).  I just checked mine (1.4) and the chip was NOT there.  I urge
>everyone to check their calcs to see if the chip is there.  look for E10.
>It should be right here:
>
>_____________________________________________________________________________
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|
>|                                                                           |
>|                                                                           |
>|                                                                           |
>|                                                     __E10_____            |
>|                                                     |XXXXXXXX|            |
>|                                                     |XXXXXXXX|            |
>|                                                     |--------|            |
>|                                                     |        |            |
>|                                                     |________|            |
>|                                                       E10                 |
>_____________________________________________________________________________
>
>Not great graphics, but it works.  The X's are the filled slot and the
>empty space denotes the empty solder pads.  Post your results and your ROM
>version to the list or to me directly.
>
>*************************************************************************
>*                                                         __            *
>*      ||||||      |||    ||||||   ||||       |||        /_/\           *
>*       ||   ||  ||   ||   ||   ||  ||      ||   ||     / /\ \          *
>*       |||||    ||   ||   |||||    ||      ||   ||    / /\ \ \         *
>*       ||       |||||||   ||   ||  ||  ||  ||   ||   / / /\ \ \        *
>*      ||||      ||   ||  ||||||   |||||||    |||    / / /  \ \ \       *
>*                                                   / /_/____\ \ \      *
>*             Pablo XXX                            /_/________\_\/\     *
>*                   rmay@esu3.esu3.k12.ne.us       \_\___________\/     *
>*                                                                       *
>*************************************************************************
>
>
>
I have rom rev 1.3 and my unit does not even have the open pads (E10)
is this possible or am I just blind?





Srinivas Thakkilapati
thakkis@email.uc.edu