Re: LF: TI-92 Modem
[Prev][Next][Index][Thread]
Re: LF: TI-92 Modem
Could you post this uue? Thanks! :)
On Sat, 30 Nov 1996 13:32:28 -0500 JBridge21@aol.com writes:
>OK, here's some docs for TI-92 Modem v1.1.
>
>When you enter the COM ports, enter just the number, like 1, 2, 3, or
>4.
>Otherwise it will screw up.
>
>Device settings: The device settings specify what devices are
>connected (by
>the program) and can chat. For example, on Computer <-> TI-92 the
>modem
>cannot be used. On the fourth setting, however, all three devices can
>communicate with each other.
>
>Screen settings: These are pretty self-explanatory. One screen, all
>output
>goes to one big window. Split screen, it goes to two or three,
>depending on
>the device setting. I have made it possible (when in device mode 4) to
>either
>have the TI-92 in the middle and the modem on the bottom (of the
>screen), or
>have the modem in the middle and the TI-92 on the bottom. The same
>applies
>for device setting 1 (TI-92 <-> Modem).
>
>Keys: Alt-C clears the computer's window. (if it is there)
>Home gets you back to the options screen.
>ESC quits the program.
>
>Is this enough, or does anyone need more?
>
>Tilde,
>Jeffrey :j
>JBridge21@aol.com
>
References: