Sv: A89: Opening TI-89

To: <assembly-89@lists.ticalc.org>
Subject: Sv: A89: Opening TI-89
From: "Andreas Hjordt" <ahj@trition.dk>
Date: Tue, 14 Nov 2000 11:37:56 +0100
References: <77.bfd59e2.2741bba1@aol.com> <3A10DBA4.B8D153B0@oregontrail.net>
Reply-To: assembly-89@lists.ticalc.org


Brutal force was the remedy for my ti83, seriously

Andreas Hjordt


----- Original Message ----- 
From: Cassady Roop <croop@oregontrail.net>
To: <assembly-89@lists.ticalc.org>
Sent: Tuesday, November 14, 2000 7:28 AM
Subject: Re: A89: Opening TI-89


> 
> There must be some super-secret plastic snaps deviously placed around
> the entire case perimeter that are holding the blasted thing together,
> batman!
> 
> This is where you pray to the calculator gods as you pry the thing apart
> with an old rusty screwdriver...
> 
> JHill8075@aol.com wrote:
> > 
> > Ok. I took off the 6 screws plus the scew for the back-up battery on
> > the back
> > of my TI-89. When I try to open it, it won't open. It's almost as
> > though
> > there is another screw that I missed holding it together. I looked to
> > see if
> > I could find it, but I didn't see it anywhere. Is there something else
> > that I
> > have to do to get the cover off? My link port broke and I need to fix
> > it (and
> > suggestions on how to do this?). Thanks.
> > 
> > Josh
>

References:

A89: Opening TI-89

From: JHill8075@aol.com

Re: A89: Opening TI-89

From: Cassady Roop <croop@oregontrail.net>