Re: A89: anyone else had this problem?

To: <assembly-89@lists.ticalc.org>
Subject: Re: A89: anyone else had this problem?
From: "Klaus" <lukas1@xpoint.at>
Date: Sun, 9 Aug 1998 23:36:03 +0200
Delivered-To: assembly-89-outgoing@towerguard.unix.edu.sollentuna.se
Reply-To: assembly-89@lists.ticalc.org


On the Ti-92 the LCD Memory is about 30*128 Bytes, after that comes the
contrast control and after that the rest of the ram. On the TI-89 the LCD
Memory is only 20*100 Bytes!! If you write 30*128 (normal 92asm program) to
the LCD Memory of the TI-89, the memory afterwards gets corrupted.
That's why your calculator freezes.

Klaus Lukaschek
lukas1@xpoint.at

-----Ursprüngliche Nachricht-----
Von: TurboSoft@aol.com <TurboSoft@aol.com>
An: assembly-89@lists.ticalc.org <assembly-89@lists.ticalc.org>
Datum: Dienstag, 01. September 1998 22:19
Betreff: Re: A89: anyone else had this problem?


>
>In a message dated 8/31/98 9:59:59 PM Eastern Daylight Time, pat@jalyn.com
>writes:
>
>> Ok, let say you install the PlusShell (with all included files) and
Phoenix.
>>  Then you go to run shell() on the home screen and it says something
about
>>  the mem.  Then the calc freezes up and it still says BUSY on the bottom.
>>  Has this happened to anyone else?  Is there any way to run a asm
program?
>>  That is how the manual says to run a asm program.  Please help.  Thanks.
>>      Pat
>uh...don't do that... it's for the 92+

Prev: Re: A89: The power of basic!
Next: Re: A89: anyone else had this problem?
Index(es):
- Main
- Thread